[mythtv-users] Tuning a Plextor TV402U
Stefan van der Eijk
stefan at eijk.nu
Wed Jun 8 20:47:43 UTC 2005
Graham,
I managed to get mythtv working with the TV402U, but I stumbled into a
few hurdles too. I used the kernel-multimedia-2.6.11-9.mm.2mdk, which
includes the go7007 drivers. The next step was getting the firmware
loaded. These were the steps I took:
Copy the hotplug scripts:
cp ~/wis-go7007-linux-0.9.4/hotplug/wis.usermap-ezusb
/etc/hotplug/usb/wis-ezusb.usermap
cp ~/wis-go7007-linux-0.9.4/hotplug/wis-ezusb.in
/etc/hotplug/usb/wis-ezusb
Copy the firmware:
cp -R ~/wis-go7007-linux-0.9.4/firmware/* /lib/firmware/
I needed to modify the wis-ezusb script a bit to get it to work:
diff ~/wis-go7007-linux-0.9.4/hotplug/wis-ezusb.in
/etc/hotplug/usb/wis-ezusb -ur
--- /root/wis-go7007-linux-0.9.4/hotplug/wis-ezusb.in 2005-03-16
18:25:40.000000000 +0100
+++ /etc/hotplug/usb/wis-ezusb 2005-06-08 13:38:47.000000000 +0200
@@ -8,10 +8,10 @@
# Assumes 2002_04_11 release of fxload (or later)
-FIRMWARE_DIR=@FIRMWARE_DIR@/ezusb
+FIRMWARE_DIR=/lib/hotplug/firmware/ezusb
FIRMWARE=
FLAGS=
-LOADER=/sbin/fxload
+LOADER=/usr/sbin/fxload
# pre-renumeration device IDs
case $PRODUCT in
The fxload package needs to be installed, and the
/etc/hotplug.d/default/20-hal.hotplug symlink removed, otherwise the
firmware won't load. This may be a Mandriva issue. See:
http://groups.google.nl/group/alt.os.linux.mandrake/browse_thread/thread/e5465be0c95b2231/f5aef2e102d7794f?q=go7007&rnum=2&hl=xx-elmer#f5aef2e102d7794f
I then managed to capture a .avi file with the "gorecord" application.
Then I went to mythtv, and when I pressed "c", the input would change,
but what I saw on the screen didn't. I noticed the the following
messages (unsupported ioctl) in syslog:
Jun 8 20:18:46 localhost kernel: wis-sony-tuner: tuning to frequency
736.0000 (UHF)
Jun 8 20:18:51 localhost kernel: go7007: unsupported ioctl -1070565886
Jun 8 20:18:51 localhost kernel: go7007: unsupported ioctl 1076917763
Jun 8 20:18:51 localhost kernel: go7007: unsupported ioctl -1070565886
Jun 8 20:18:51 localhost kernel: go7007: unsupported ioctl 1076917763
Jun 8 20:18:51 localhost kernel: wis-sony-tuner: tuning to frequency
192.0000 (VHF_H)
Jun 8 20:19:00 localhost kernel: go7007: unsupported ioctl -1070565886
Jun 8 20:19:00 localhost kernel: go7007: unsupported ioctl 1076917763
Jun 8 20:19:00 localhost kernel: go7007: unsupported ioctl -1070565886
Jun 8 20:19:00 localhost kernel: go7007: unsupported ioctl 1076917763
Jun 8 20:19:00 localhost kernel: wis-sony-tuner: tuning to frequency
192.0000 (VHF_H)
Jun 8 20:19:02 localhost kernel: go7007: unsupported ioctl -1070565886
Jun 8 20:19:02 localhost kernel: go7007: unsupported ioctl 1076917763
Jun 8 20:19:02 localhost kernel: go7007: unsupported ioctl -1070565886
Jun 8 20:19:02 localhost kernel: go7007: unsupported ioctl 1076917763
Jun 8 20:19:02 localhost kernel: wis-sony-tuner: tuning to frequency
192.0000 (VHF_H)
Jun 8 20:19:04 localhost kernel: go7007: unsupported ioctl -1070565886
Jun 8 20:19:04 localhost kernel: go7007: unsupported ioctl 1076917763
Jun 8 20:19:04 localhost kernel: go7007: unsupported ioctl -1070565886
Jun 8 20:19:04 localhost kernel: go7007: unsupported ioctl 1076917763
Jun 8 20:19:04 localhost kernel: wis-sony-tuner: tuning to frequency
192.0000 (VHF_H)
Jun 8 20:19:06 localhost kernel: go7007: unsupported ioctl -1070565886
Jun 8 20:19:06 localhost kernel: go7007: unsupported ioctl 1076917763
Jun 8 20:19:06 localhost kernel: go7007: unsupported ioctl -1070565886
Jun 8 20:19:06 localhost kernel: go7007: unsupported ioctl 1076917763
Jun 8 20:19:06 localhost kernel: wis-sony-tuner: tuning to frequency
192.0000 (VHF_H)
Jun 8 20:19:07 localhost kernel: go7007: unsupported ioctl -1070565886
Jun 8 20:19:07 localhost kernel: go7007: unsupported ioctl 1076917763
Jun 8 20:19:07 localhost kernel: go7007: unsupported ioctl -1070565886
Jun 8 20:19:07 localhost kernel: go7007: unsupported ioctl 1076917763
Jun 8 20:19:07 localhost kernel: wis-sony-tuner: tuning to frequency
192.0000 (VHF_H)
My hunch is that mythtv may be doing something wrong when trying to
change the input connections. The trick I used was to record something
with gorecord, on the input that you want to use in mythtv. Then, turn
on mythtv and you'll be able to use it.
regards,
Stefan van der Eijk
PS: CC-ing Mandriva's cooker list, perhaps we'll get this hardware
supported out of the box one day...
>I recently switched from a stock BT828 based MythTV setup to a Plextor
>TV402U, but seem to be stumbling at the final hurdle. I've managed to
>get the TV402U working with my Mandriva PC (gorecord works fine), but
>I don't understand how to get the channel information for recording
>off the tuner input on the device.
>
>I've used myth-setup and downloaded all the xmltv channel information
>for my terrestrial signal here in the UK, but switching to Watch TV in
>MythTV only produces the white-noise signal of an untuned channel. Is
>it currently possible to use the tuner input on the TV402U? Or am I
>missing something obvious?
>
>Many thanks for any help or advice!
>_______________________________________________
>mythtv-users mailing list
>mythtv-users at mythtv.org
>http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
>
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/x-pkcs7-signature
Size: 3158 bytes
Desc: S/MIME Cryptographic Signature
Url : http://mythtv.org/pipermail/mythtv-users/attachments/20050608/903e8f0e/smime.bin
More information about the mythtv-users
mailing list