[mythtv-users] What to use for dvb-path and a dvb-apps question
michael.haan at gmail.com
Thu Jun 9 15:12:18 UTC 2005
On 6/9/05, Mercury Morris <mercury.morris at gmail.com> wrote:
> In mythtv-setup, I tried to add an HD-3000 card as a
> Digital Video Broadcast (DVB) device. In the center
> of the screen was a line telling me to recompile with
> DVB support.
> Yesterday, when I compiled mythtv (0.18.20050523-1)
> I noticed that make --help showed --dvb-path. So, I
> Googled around, but didn't find a solid answer, and left
> out both --enable-dvb AND --dvb-path. Bad idea.
> So, now I must recompile mythtv, but what is the value
> to use for --dvb-path ? I should also ask about where
> and how to get/install dvb-apps, assuming I can figure
> out what to use for dvb-path.
> The kernel is 2.6.12-rc6, with all the Video Adapters
> compiled as modules, including CX88_DVB.
> There is also a PVR-350 card installed and working,
> using ivtv-0.3.6e.
> If you are using a 2.6.12 kernel and have compiled
> mythtv with DVB support, would you post what you
> used for dvb-path ?
> mythtv-users mailing list
> mythtv-users at mythtv.org
I have all those things with the exception being that I run myth on a
gentoo box and built it from an ebuild. This may be helpful in that I
didn't specify anything like that, and my setup works. It may be that
gentoo defaults that value to a location and you should know that i
had to create some sym links from the driver locations created by my
cx88-dvb driver (/dev/dvb.net0, /dev/dvb.dvr0 etc) to where myth was
looking for them (/dev/dvb/adapter0/net0 etc.).
More information about the mythtv-users