[mythtv-users] Re: DVB-T problems with sound
Barry Hee
barryhee at gmail.com
Fri Jun 10 23:08:06 UTC 2005
Hi Nick, I have the same problems to you, albeit occassionally and for
some reason late at night. I record using PS mode because I view all
recordings through my Pinnacle Showcenter, so TS mode is not an
option. During PS recordings all audio tracks are recorded I believe
so sometimes it's possible to switch audio tracks as discussed here.
Unfortunately for me some channels in Australia i.e. Channel 7 in
Sydney one audio channel is silent hence when a glitch happens the
primary audio disappears and I don't get anything at all.
My wife loves Myth and now can't live without it but this one problem
is causing some heartaches especiallly when its one of her favourite
shows.
I am in the process of rewiring my antenna using quad RG6 and amps
hoping to get much better (>75%) signal strength according to Myth
scans and testing the latest CVS.
Anyone know if this is still a problem in the current CVS and what I
can expect if I do the rewiring? Nick if you find a solution like to
hear from you.
Thanks,
Barry.
On 6/10/05, Nick Tan <nick at wehi.edu.au> wrote:
> Hi All,
>
> I have a Pentium 4 celeron 2.4Ghz system with 512mb ram running Fedora 3
> and Myth 0.18.1. I have a PVR-250MCE recording via s-video from an
> external cable tuner, and a KWorld V-Stream Xpert DVB-T connected to an
> external antenna (via a signal booster) recording terrestrial digital
> channels. I'm running a custom compiled 2.6.11.11 kernel patched with
> drivers from video4linux. TV-out is via svideo from an Nvidia 5200, and
> audio is using a SBLive value through the digital output to an amplifier.
>
> Its all working great except for one thing. On the DVB recordings, on
> occasion the picture and sound will break up for a second at the most, and
> then it'll continue on as normal. I'm guessing its just errors in the
> signal, or a low signal strength. However, on a few occasions the picture
> will come back but the audio disappears.
>
> I don't see any errors in the logs, so I'm wondering if anyone else has
> seen this problem and if there's a resolution for it.
>
> This is an example of a capture log from mythbackend, from yesterday's
> showing of Dr Phil:
>
> 2005-06-09 11:58:01.946 Started recording "Dr. Phil" on channel: 2018 on
> cardid:
> 2, sourceid 2
> 2005-06-09 11:58:02.461 DVB#0 DVB signal 13c4 | snr c6c6 | ber 0 | unc
> ffff
> 2005-06-09 11:58:02.492 DVB#0 Status: LOCK.
> 2005-06-09 11:58:02.493 DVB#0 Multiplex Locked
> 2005-06-09 11:58:03.605 DVB#0 Successfully tuned to channel 900.
> 2005-06-09 11:58:03.705 Changing from None to RecordingOnly
> 2005-06-09 11:58:03.814 DVB#0 Recorder: Card opened successfully (using PS
> mode)
> .
> 2005-06-09 11:58:03.823 DVB#0 Data read from DMX - This is for debugging
> with tr
> ansform.c
> 2005-06-09 13:07:00.002 Finished recording Dr. Phil on channel: 2018
>
> The DVB kernel modules I'm using are cx88xx, cx8800, cx8802 and cx88-dvb
>
> Thanks,
>
> Nick
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
More information about the mythtv-users
mailing list