[mythtv-users] Lirc doesn't work
Oscar Curero
Oscar at naiandei.net
Wed Jun 22 21:23:31 UTC 2005
Hi,
Now I'm trying to setup my remote control using the lirc daemon (suse) and the
pvr-350. Although it's not perfect (I mean, suse is different), I'm following
the howto for fedore core.
The howto says:
If you get one or two [OK]'s, then proceed to testing the remote (one is for
lircd, one is for lircmd; you only really need lircd). If not, check
/var/log/messages to see if you can figure out what went wrong. To begin
testing, fire up the irw tool:"
For me, irw doesn't give my anything. Some buttons produce a "dmesg" output
(there are other buttons that neither produce irw nor dmesg output):
For "ok" button:
i2c IR (Hauppauge): unknown key: key=0x25 raw=0x37a5 down=1
i2c IR (Hauppauge): unknown key: key=0x25 raw=0x37a5 down=0
For "down" button:
i2c IR (Hauppauge): unknown key: key=0x15 raw=0x3f95 down=1
i2c IR (Hauppauge): unknown key: key=0x15 raw=0x3f95 down=0
For "video" button:
i2c IR (Hauppauge): unknown key: key=0x18 raw=0x3798 down=1
i2c IR (Hauppauge): unknown key: key=0x18 raw=0x3798 down=0
What's the problem?
--
Linux user: #306877
More information about the mythtv-users
mailing list