[mythtv-users] DVB - MythTVSetup unable to scan channels

[Christopher McEwan]

On Thu, 17 Mar 2005 07:10:54 GMT, Tom Hughes <tom at compton.nu> wrote:
> In message <481fca4c4d.mark at frodo.chez-moi.org.uk>
>           Mark Smith <mark at chez-moi.org.uk> wrote:
> 
> > I have a new Myth box which (for the moment) I'm currently setting up one
> > VisionPlus DVB-T card.
> >
> > I've managed to get a signal lock using the DVB tools:
> >
> > [mythtv at Galadriel util]# szap/tzap "BBC ONE"
> > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
> > reading channels from file '/home/mythtv/.tzap/channels.conf'
> > tuning to 505833330 Hz
> > video pid 0x0258, audio pid 0x0259
> > status 00 | signal 0000 | snr 0000 | ber bfe4b244 | unc 00a7ac19 |
> > status 1f | signal 3f00 | snr 5000 | ber bfe4b244 | unc 00a7ac19 | FE_HAS_LOCK
> > status 1f | signal 3f00 | snr 5000 | ber bfe4b244 | unc 00a7ac19 | FE_HAS_LOCK
> > status 1f | signal 3f00 | snr 5000 | ber bfe4b244 | unc 00a7ac19 | FE_HAS_LOCK
> >
> > However, mythtvsetup seems unable to scan the channels, despite being given
> > the correct starting frequency (50583330 Hz):
> 
> Did you fill in all the other tuning parameters correctly? It isn't
> just the frequency you need to set, but the other 7 or 8 parameters
> on that screen as well.
> 
> Tom
> 
> --
> Tom Hughes (tom at compton.nu)
> http://www.compton.nu/
> 
> 
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> 
> 
> 
Some of them you can leave as auto, but yes you need to set other
parameters like the QAM.


-- 
Regards,


~CM