[mythtv-users] Need help getting Lirc to work with pvr-150

[Andy Alsup]

Hi,

I used Jarod's doc to set up:

- Myth 0.17 from rpm
- lirc from rpm with New Hauppauge grey/black lircd.conf from Jarod's howto
- FC3 upgraded kernel to 2.6.10-1.770_FC3 with apt
- pvr-150 using ivtv  0.3.2m compiled from source

using this setup, I load the lirc_i2c module, start lircd, start irw
and don't see any output from button pushes.

I do see that irw opens and closes the conection to lircd.  and if I
load myth, I see that a connection was opened as well.

So, it would seem that the lirc part is at least connecting.  I'm not
sure lircd is seeing the hardware though.  The device in /dev is a
socket.  Shouldn't it be a char 61 device?

srw-rw-rw-  1 root root 0 Mar 24 14:57 /dev/lircd

One more thing, when I load the lirc_i2c module, I get:

lirc_dev: no version for "struct_module" found: kernel tainted.
lirc_dev: IR Remote Control driver registered, at major 61

Does "kernel tainted" mean anything?

Here's the relevant logs:

Linux video capture interface: v1.00
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.3.2 (m) loading
ivtv: Linux version: 2.6.10-1.770_FC3 686 REGPARM 4KSTACKS gcc-3.4
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 150 card
ivtv: Found an iTVC16 based chip
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 10 (level, low) -> IRQ 10
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
ivtv: VIA PCI device: 0x0305 vendor: 0x1106
tveeprom: Hauppauge: model = 26052, rev = C185, serial# = 7579491
tveeprom: tuner = TCL 2002N 6A (idx = 85, type = 50)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio_processor = MSP3410D (type = 5)
ivtv: i2c attach [client=tveeprom[0],ok]
ivtv: Tuner Type 50, Tuner formats 0x00001000, Radio: yes, Model
0x008d1615, Revision 0x00000000
ivtv: NTSC tuner detected
ivtv: Radio detected
tuner: Ignoring new-style parameters in presence of obsolete ones
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach [client=(tuner unset),ok]
cx25840: Ignoring new-style parameters in presence of obsolete ones
cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 13883 loaded.
cx25840: FW image md5 digest: a6f6a90a3be338cdb89d59e835798408
cx25840: FW image sha1 digest: ad2872fb98ad43b6c4afa45d239a57010edebe84
ivtv: i2c attach [client=cx25840[0],ok]
ivtv: i2c attach [client=wm8775[0],ok]
ivtv: Encoder revision: 0x02040024
ivtv: Encoder Firmware may be buggy, use version 0x02040011
ivtv: Configuring WinTV PVR 150 card with 5 streams
ivtv: Registered v4l2 device, streamtype 0 minor 0
ivtv: Create DMA stream 0 using 1024 16384 byte buffers  0 kbytes total
ivtv: Allocate DMA stream 0 using 1024 16384 byte buffers  16777216 kbytes total
ivtv: Registered v4l2 device, streamtype 1 minor 32
ivtv: Create DMA stream 1
ivtv: Allocate DMA stream 1
ivtv: Registered v4l2 device, streamtype 2 minor 224
ivtv: Create stream 2 using 40 52224 byte buffers  0 kbytes total
ivtv: Allocate stream 2 using 40 52224 byte buffers  2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 24
ivtv: Create DMA stream 3 using 455 4608 byte buffers  0 kbytes total
ivtv: Allocate DMA stream 3 using 455 4608 byte buffers  2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 4 minor 64
ivtv: Create stream 4
ivtv: Allocate stream 4
ivtv: Setting Tuner 50
tuner: type set to 50 (TCL 2002N) by ivtv i2c driver #0
ivtv: Switching standard to NTSC.
ivtv: Initialized WinTV PVR 150, card #0
ivtv: ====================  END INIT IVTV  ====================
ivtv: ivtv_enc_thread: pid = 4437, itv = 0xf0cf2920
lirc_dev: no version for "struct_module" found: kernel tainted.
lirc_dev: IR Remote Control driver registered, at major 61
bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture

Any advice?

Thanks!