[mythtv-users] AC3 passthrough driving me up a wall..
Justin The Cynical
cynical at penguinness.org
Thu May 12 00:36:13 UTC 2005
On Wed, May 11, 2005 17:41, Nick said:
>> > Other than that, I'd also try Xine to make sure AC3 can be passed
>> > through. It seems mplayer does not always like using default ALSA
>> > devices.
>>
>> I did. Xine doesn't work with the speakers set to passthrough either.
>>
>
> In that case, it would appear the problem is more likely ALSA. I would
> strongly consider upgrading to 1.0.8 (very straightforward using
> apt-get) to see if this resolves the problem. In the meantime, I'd
> suggest maybe posting your .asoundrc and /etc/modprobe.conf files in
> case other SB Live users can spot any particular config issues.
Modprobe.conf:
alias char-major-61 lirc_i2c
alias snd-card-0 snd-emu10k1
install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 &&
/usr/sbin/alsactl restore >/dev/null 2>&1 || :
remove snd-emu10k1 { /usr/sbin/alsactl store >/dev/null 2>&1 || : ; };
/sbin/modprobe -r --ignore-remove snd-emu10k1
alias usb-controller ehci-hcd
alias usb-controller1 ohci-hcd
# nvidia kernel module
alias char-major-195 nvidia-1_0-6111
# ivtv modules setup
alias char-major-81 videodev
alias char-major-81-0 ivtv
options ivtv ivtv_debug=1 tuner=2
options msp3400 once=0 simpler=1 simple=0
install lirc_i2c /sbin/modprobe ivtv; /sbin/modprobe --ignore-install
lirc_i2c
And asoundrc, straight from Jarod's how to (and reported to work for
others with a SB live):
# Override the default output used by ALSA.
# If you do not override the default, your default
# device is identical to the (unmixed) analog device
# shown below. If you prefer mixed and/or digital
# output, uncomment the appropriate four lines below
# (only one slave.pcm line).
### Currently set w/digital-hw as the default output,
### comment out this entire section to use unmixed
### analog as your default
### -jarod
pcm.!default {
type plug
## Uncomment the following to use mixed analog by default
# slave.pcm "dmix-analog"
## Uncomment the following to use unmixed digital by default
slave.pcm "digital-hw"
## Uncomment the following to use mixed digital by default
# slave.pcm "dmix-digital"
}
# Alias for analog output on the Audigy (hw:0,0)
# - This is identical to the device named "default"--which
# always exists and refers to hw:0,0 (unless overridden)
# - Therefore, we can specify "hw:0,0", "default", or "analog"
# to access analog output on the Audigy
pcm.analog {
type plug
slave.pcm "analog-hw"
}
# Control device (mixer, etc.) for the Audigy card
ctl.analog {
type hw
card 0
}
# Alias for (rate-converted) mixed analog output on the
# Audigy (hw:0,0)
# - This will accept audio input--regardless of rate--and
# convert to the rate required for the dmix plugin
# (in this case 48000Hz)
pcm.mixed-analog {
type plug
slave.pcm "dmix-analog"
}
# Control device (mixer, etc.) for the Audigy card
ctl.mixed-analog {
type hw
card 0
}
# Alias for (rate-converted) digital (S/PDIF) output on the
# Audigy (hw:0,0)
# - This will accept audio input--regardless of rate--and
# convert to the rate required for the S/PDIF hardware
# (in this case 48000Hz)
pcm.digital {
type plug
slave.pcm "digital-hw"
}
# Control device (mixer, etc.) for the Audigy card
ctl.digital {
type hw
card 0
}
# Alias for mixed (rate-converted) digital (S/PDIF) output on the
# Audigy (hw:0,0)
# - This will accept audio input--regardless of rate--and
# convert to the rate required for the S/PDIF hardware
# (in this case 48000Hz)
pcm.mixed-digital {
type plug
slave.pcm "dmix-digital"
}
# Control device (mixer, etc.) for the Audigy card
ctl.mixed-digital {
type hw
card 0
}
# The following devices are not useful by themselves. They
# require specific rates, channels, and formats. Therefore,
# you probably do not want to use them directly. Instead use
# of of the devices defined above.
# Alias for analog output on the Audigy (hw:0,0)
# Do not use this directly--it requires specific rate,
# channels, and format
pcm.analog-hw {
type hw
card 0
# The default value for device is 0, so no need to specify
}
# Control device (mixer, etc.) for the Audigy card
ctl.analog-hw {
type hw
card 0
}
# Alias for digital (S/PDIF) output on the Audigy (hw:0,0)
# Do not use this directly--it requires specific rate,
# channels, and format
pcm.digital-hw {
type hw
card 0
device 0
}
# Control device (mixer, etc.) for the Audigy card
ctl.digital-hw {
type hw
card 0
}
# Direct software mixing plugin for analog output on
# the Audigy (hw:0,0)
# Do not use this directly--it requires specific rate,
# channels, and format
pcm.dmix-analog {
type dmix
ipc_key 1234
slave {
pcm "analog-hw"
period_time 0
period_size 1024
buffer_size 4096
rate 48000
}
}
# Control device (mixer, etc.) for the Audigy card
ctl.dmix-analog {
type hw
card 0
}
# Direct software mixing plugin for digital (S/PDIF) output
# on the Audigy (hw:0,0)
# Do not use this directly--it requires specific rate,
# channels, and format
pcm.dmix-digital {
type dmix
ipc_key 1235
slave {
pcm "digital-hw"
period_time 0
period_size 1024
buffer_size 4096
rate 48000
}
}
# Control device (mixer, etc.) for the Audigy card
ctl.dmix-digital {
type hw
card 0
}
More information about the mythtv-users
mailing list