[mythtv-users] Multiple ATI Remote Wonders
anaerin at gmail.com
Thu Nov 3 17:34:06 EST 2005
On 03/11/05, Mercury Morris <mercury.morris at gmail.com> wrote:
> Here's my (failed) attempt to setup multiple ATI Remote Wonders
> on multiple systems:
> 1. Added this line to /etc/modprobe.conf
> options lirc_atiusb unique=1 debug=1 mask=0x0002
> 2. Pressed and held the "hand" key until the LED began to blink,
> Pressed the 2 key, then Pressed the "hand" key again
> 3. Re-booted the system
> Here's what didn't work:
> 1. Entries in /var/log/messages showed "data received" messages,
> but the MythTV screens didn't change as keys were pressed
> 2. No debug messages printed by the "dprintk" subroutine
> in lirc_atiusb.c were ever displayed - making debugging difficult!
> I went through the documentation in the lirc-0.7.2 package,
> reading "lircd.conf.atiusb", and read the output from the command,
> "modinfo lirc_atiusb". I don't see where I went wrong, or left anything
> It's gotten too late today to continue debugging this. That is, recordings
> are scheduled in the next two hours. Restoring the previous
> restored the machine to normal operation after another reboot.
> I'll continue tomorrow and into the weekend.
Tried seeing what irw reports as you press keys on the remote?
Robert "Anaerin" Johnston
More information about the mythtv-users