[mythtv-users] HELP: No TV after hw install of HD3000 (w/ PVR250 and FC4)

[Brad Fuller]

R. Geoffrey Newbury wrote:

>On Fri, 25 Nov 2005 13:00:16 -0800, Brad Fuller wrote:
>  
>
>>I now have no livetv. I checked recent recordings and there are no files 
>>of recent recordings. So, I assume that the tuner is not being 
>>recognized because of the HD3000 just placed in the pc.
>>
>>I checked modprobe.conf and cx88-blackbird was installed above the ivtv 
>>driver automatically after the first reboot. So, I ran the "extras" from 
>>pcHDTV site which installed: cx88-atsc, cx88-dvb and cx88-risc in 
>>modprobe.conf. 
>>    
>>
>
>I remember reading, and my setup, has the ivtv driver first (video0 and
>video1), followed by whatever cx88* drivers.
>
>If you use cx88_dvb + blackbird, the card should show up at
>/dev/dvb/adapter0
>If you use cx8800 the card would be (was for me, when I tried it) at
>/dev/video2  (NTSC...) I haven't tried the cx88-atsc but I presume that it
>could easily show up at /dev/video32..
>
>Geoff
>R. Geoffrey Newbury                          newbury at mandamus.org
>Barrister and Solicitor                         Telephone: 905-271-9600                 
>Mississauga,Ontario, Canada              Facsimile:   905-271-1638
>  
>
The other issue I have after I switch the PVR-250 to video1 is my remote 
doesn't work in mythtv. It works fine with "irw".
I suspect it has something to do with this switch from Video0 to Video1 
for PVR-250.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mythtv.org/pipermail/mythtv-users/attachments/20051125/a1b2403f/attachment.htm