[mythtv-users] Running Mythtv-setup without X

Pascal Favre Pascal.Favre at gmx.net
Sat Nov 26 04:57:59 EST 2005


At the minimum the mythtv-setup program is linked against the X11 libraries.
When shared linked, X11 has to be installed on your server. This can be checked with ldd; see below for output.
Statically linked: you needed a server with X11 installed. After that you transfer it to server without X.

Running mythtv-setup remotely will work .

Regards Pascal
--------------
/usr/local/bin> ldd mythtv-setup
        linux-gate.so.1 =>  (0xffffe000)
        libmythtv-0.18.1.so.0 => /usr/local/lib/libmythtv-0.18.1.so.0 (0x40037000)
        libmythavformat-0.18.1.so.0 => /usr/local/lib/libmythavformat-0.18.1.so.0 (0x405e0000)
        libmythavcodec-0.18.1.so.0 => /usr/local/lib/libmythavcodec-0.18.1.so.0 (0x40636000)
        libmyth-0.18.1.so.0 => /usr/local/lib/libmyth-0.18.1.so.0 (0x40925000)
        libfreetype.so.6 => /usr/lib/libfreetype.so.6 (0x40bff000)
        libmp3lame.so.0 => /usr/lib/libmp3lame.so.0 (0x40c6f000)
        libasound.so.2 => /usr/lib/libasound.so.2 (0x40d03000)
        libXinerama.so.1 => /usr/X11R6/lib/libXinerama.so.1 (0x40db9000)
        libXv.so.1 => /usr/X11R6/lib/libXv.so.1 (0x40dbc000)
        libXxf86vm.so.1 => /usr/X11R6/lib/libXxf86vm.so.1 (0x40dc1000)
        libqt-mt.so.3 => /usr/lib/libqt-mt.so.3 (0x40dc6000)
        libXext.so.6 => /usr/X11R6/lib/libXext.so.6 (0x414c9000)
        libX11.so.6 => /usr/X11R6/lib/libX11.so.6 (0x414d8000)
        libpthread.so.0 => /lib/tls/libpthread.so.0 (0x415d4000)
        libstdc++.so.5 => /usr/lib/libstdc++.so.5 (0x415e6000)
        libm.so.6 => /lib/tls/libm.so.6 (0x416a4000)
        libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x416c7000)
        libc.so.6 => /lib/tls/libc.so.6 (0x416cf000)
        liblirc_client.so.0 => /usr/local/lib/liblirc_client.so.0 (0x417e9000)
        libdl.so.2 => /lib/libdl.so.2 (0x417ee000)
        libresmgr.so.0.9.8 => /lib/libresmgr.so.0.9.8 (0x417f2000)
        libpng.so.3 => /usr/lib/libpng.so.3 (0x417f6000)
        libz.so.1 => /lib/libz.so.1 (0x41824000)
        libXi.so.6 => /usr/X11R6/lib/libXi.so.6 (0x41836000)
        libXrender.so.1 => /usr/X11R6/lib/libXrender.so.1 (0x4183e000)
        libXrandr.so.2 => /usr/X11R6/lib/libXrandr.so.2 (0x41846000)
        libXcursor.so.1 => /usr/X11R6/lib/libXcursor.so.1 (0x4184a000)
        libXft.so.2 => /usr/X11R6/lib/libXft.so.2 (0x41853000)
        libfontconfig.so.1 => /usr/lib/libfontconfig.so.1 (0x41866000)
        libSM.so.6 => /usr/X11R6/lib/libSM.so.6 (0x41895000)
        libICE.so.6 => /usr/X11R6/lib/libICE.so.6 (0x4189d000)
        /lib/ld-linux.so.2 (0x40000000)
        libexpat.so.0 => /usr/lib/libexpat.so.0 (0x418b5000)

----- Original Message ----- 
From: "Korey Fort" <k.m.fort at gmail.com>
To: "'Discussion about mythtv'" <mythtv-users at mythtv.org>
Sent: Saturday, November 26, 2005 6:30 AM
Subject: RE: [mythtv-users] Running Mythtv-setup without X


> 
>> You don't need to have X installed on your backend.  I don't on mine.  
>> What you need is an X server on your PC such as Xmanager from 
>> NetSarang (www.xmanager.com for 30 day free trial) and combine is with 
>> SSH with X forwarding.
>>
>> When you configure xstart to connect to the MBE choose ssh and an 
>> execution command of "/usr/X11R6/bin/xterm -ls -display $DISPLAY".  
>> You will then get a little xterm terminal window and in that you can 
>> run mythtv-setup.  It takes a while to load over wifi network but it 
>> works fine.
> 
> Try cygwin on a pc. Install the xorg, ssh packages. There is no trial
> period,  http://www.cygwin.com/setup.exe
> 
> 
>


--------------------------------------------------------------------------------


_______________________________________________
mythtv-users mailing list
mythtv-users at mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users



More information about the mythtv-users mailing list