[mythtv-users] DViCO Fusion HDTV 5 Lite status?

[mrwester]

Hi-

I've searched and am not 100% clear on the status of FusionHDTV 5 Lite
card.  If someone knows of a howto for these cards, please feel free to
point me in the right direction.  A general howto for these cards might go a
long way for me, but unfortunately I've not found one.   My understanding is
that it is supported in 2.6.14 kernels?  I've got the 2.6.14 kernel from
FC4, and it appears to have support compiled in. I'm trying to add the card
to a mythtv setup that has a pvr-350 and pvr-500 capturing well and dvi
output via nvidia 5200.

Relevant parts of dmesg:

bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [LNK1] -> GSI 11 (level, low) ->
IRQ 11
bttv0: Bt878 (rev 17) at 0000:01:0a.0, irq: 11, latency: 32, mmio:
0xe4000000
bttv0: detected: DViCO FusionHDTV 5 Lite [card=135], PCI subsystem ID is
18ac:d500
bttv0: using: DViCO FusionHDTV 5 Lite [card=135,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
tuner 5-0061: chip found @ 0xc2 (bt878 #0 [sw])
tda9885/6/7: chip found @ 0x86
bttv0: using tuner=64
tuner 5-0061: type set to 64 (LG TDVS-H062F/TUA6034)
bttv0: i2c: checking for TDA9887 @ 0x86... found
bttv0: registered device video3
bttv0: registered device vbi3
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).

I don't see any references to DVB despite  running  /sbin/modprobe dvb-bt8x
X.  Any ideas?  Thanks,

Mike
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mythtv.org/pipermail/mythtv-users/attachments/20051128/39819cba/attachment.htm