[mythtv-users] DViCO Fusion HDTV 5 Lite status?

W.Kenworthy billk at iinet.net.au
Tue Nov 29 01:09:46 EST 2005


My module list for a working plus card: lite should be similar?

dvb_bt8xx              12996  0
nxt6000                 8132  1 dvb_bt8xx
sp887x                  8516  1 dvb_bt8xx
dst_ca                 14848  1 dvb_bt8xx
dst                    20676  2 dvb_bt8xx,dst_ca
cx24110                 8708  1 dvb_bt8xx
or51211                 9924  1 dvb_bt8xx
bt878                  10424  2 dvb_bt8xx,dst
cx88_dvb                9540  7
mt352                   6980  2 dvb_bt8xx,cx88_dvb
or51132                10244  1 cx88_dvb
video_buf_dvb           6276  1 cx88_dvb
lgdt330x                8284  1 cx88_dvb
cx22702                 6788  1 cx88_dvb
dvb_pll                 9476  3 cx88_dvb,or51132,cx22702
cx88_blackbird         15620  0
cx8802                 11716  2 cx88_dvb,cx88_blackbird
cx8800                 32588  0
cx88xx                 58336  4 cx88_dvb,cx88_blackbird,cx8802,cx8800
ir_common               8324  1 cx88xx
dvb_core               83304  3 dvb_bt8xx,dst_ca,video_buf_dvb
bttv                  162576  2 dvb_bt8xx,bt878
firmware_class         10432  6
dvb_bt8xx,sp887x,or51211,or51132,cx88_blackbird,bttv
tveeprom               11920  2 cx88xx,bttv
i2c_algo_bit            9480  2 cx88xx,bttv
videodev                9344  4 cx88_blackbird,cx8800,cx88xx,bttv
v4l1_compat            14468  1 cx8800
v4l2_common             5824  2 cx8800,bttv
i2c_core               21328  15
dvb_bt8xx,nxt6000,sp887x,dst,cx24110,or51211,cx88_dvb,mt352,or51132,lgdt330x,cx22702,cx88xx,bttv,tveeprom,i2c_algo_bit
btcx_risc               4936  4 cx8802,cx8800,cx88xx,bttv
video_buf              21636  7
cx88_dvb,video_buf_dvb,cx88_blackbird,cx8802,cx8800,cx88xx,bttv


BillK

On Mon, 2005-11-28 at 21:42 -0800, mrwester wrote:
> Hi-
> 
> I've searched and am not 100% clear on the status of FusionHDTV 5 Lite
> card.  If someone knows of a howto for these cards, please feel free
> to point me in the right direction.  A general howto for these cards
> might go a long way for me, but unfortunately I've not found one.   My
> understanding is that it is supported in 2.6.14 kernels?  I've got the
> 2.6.14 kernel from  FC4, and it appears to have support compiled in.
> I'm trying to add the card to a mythtv setup that has a pvr-350 and
> pvr-500 capturing well and dvi output via nvidia 5200.
> 
> Relevant parts of dmesg:
> 
> bttv: driver version 0.9.16 loaded
> bttv: using 8 buffers with 2080k (520 pages) each for capture
> bttv: Bt8xx card found (0).
> ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [LNK1] -> GSI 11 (level,
> low) -> IRQ 11
> bttv0: Bt878 (rev 17) at 0000:01:0a.0, irq: 11, latency: 32, mmio:
> 0xe4000000
> bttv0: detected: DViCO FusionHDTV 5 Lite [card=135], PCI subsystem ID
> is 18ac:d500
> bttv0: using: DViCO FusionHDTV 5 Lite [card=135,autodetected]
> bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
> tuner 5-0061: chip found @ 0xc2 (bt878 #0 [sw])
> tda9885/6/7: chip found @ 0x86
> bttv0: using tuner=64
> tuner 5-0061: type set to 64 (LG TDVS-H062F/TUA6034)
> bttv0: i2c: checking for TDA9887 @ 0x86... found
> bttv0: registered device video3
> bttv0: registered device vbi3
> bt878: AUDIO driver version 0.0.0 loaded
> bt878: Bt878 AUDIO function found (0).
> 
> I don't see any references to DVB despite  running  /sbin/modprobe
> dvb-bt8xX.  Any ideas?  Thanks,
> 
> Mike
> 
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users


More information about the mythtv-users mailing list