[mythtv-users] Re: Trouble getting component outputs to work with nVidia 6200

[Alan Anderson]

I am far from an expert but I have been twiddling with this myself.  The first 
paramater 26.625 on your mode line needs to be in the HorizSync range  it is 
not.


>Section "Monitor"
>       Identifier "Monitor0"
>      VendorName "Some Vendor"
>       ModelName "HDTV"
>      HorizSync 31.5 - 37.9
>      VertRefresh 59.9 - 60.1
>       ModeLine "720x480" 26.625 720 752 824 896 480 481 484 497 -hsync 
>-vsync
>Now, at first, this failed completely, and X wouldn't even start. After 
>checking out my Xorg.0.log file, I saw that it didn't like the hsync 
>range of my 720x480 Mode. However, it did like the default 800x600 
>mode.! So, just for fun, I changed

Change the first paramatere to  be in the HorzSync range (or adjust the 
HotrzSync range) and restart X and then look at the Xorg.0.log to see if the 
720x480 is acceptable.  Then if its acceptable try to use it.