[mythtv-users] Re: Fedora Mythtv, pcHDTV and Comcast?

[Mark Linford]

On 10/9/05, Dennis Lou <dlou99 at yahoo.com> wrote:

> You said you were using an HD3000, not an HD2000
> so that means you should be using cx88 drivers,
> not bt8x8 drivers.  Try modprobe cx88-dvb
> instead.  Or, if you are brave, kudzu (I personally
> never liked that tool much, though).

OK, modprobe cx88-dvb gives me:

WARNING: Error inserting cx88xx
(/lib/modules/2.6.13-1.1526_FC4/kernel/drivers/media/video/cx88/cx88xx.ko):
Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting cx8802
(/lib/modules/2.6.13-1.1526_FC4/kernel/drivers/media/video/cx88/cx8802.ko):
Unknown symbol in module, or unknown parameter (see dmesg)
FATAL: Error inserting cx88_dvb
(/lib/modules/2.6.13-1.1526_FC4/kernel/drivers/media/video/cx88/cx88-dvb.ko):
Unknown symbol in module, or unknown parameter (see dmesg)

and dmesg give me a whole lot more:

cx88xx: disagrees about version of symbol tveeprom_hauppauge_analog
cx88xx: Unknown symbol tveeprom_hauppauge_analog
cx8802: Unknown symbol cx88_reset
cx8802: Unknown symbol cx88_wakeup
cx8802: Unknown symbol cx88_risc_stopper
cx8802: Unknown symbol cx88_print_irqbits
cx8802: Unknown symbol cx88_shutdown
cx8802: Unknown symbol cx88_core_irq
cx8802: Unknown symbol cx88_sram_channels
cx8802: Unknown symbol cx88_sram_channel_dump
cx8802: Unknown symbol cx88_sram_channel_setup
cx8802: Unknown symbol cx88_free_buffer
cx8802: Unknown symbol cx88_boards
cx8802: Unknown symbol cx88_risc_databuffer
cx88_dvb: Unknown symbol cx8802_fini_common
cx88_dvb: Unknown symbol cx88_core_put
cx88_dvb: Unknown symbol cx88_core_get
cx88_dvb: Unknown symbol cx8802_resume_common
cx88_dvb: Unknown symbol cx8802_buf_prepare
cx88_dvb: Unknown symbol cx8802_init_common
cx88_dvb: Unknown symbol cx88_free_buffer
cx88_dvb: Unknown symbol cx88_boards
cx88_dvb: Unknown symbol cx8802_buf_queue
cx88_dvb: Unknown symbol cx8802_suspend_common

Something to do with my PVR-150, perhaps? If I have time tonight, I'll
try removing that card and try again ...


>
> > > 2. Get the CVS dvb-apps and run the script
> > > attached to this message:
> > >
> > >
> >
> http://www.gossamer-threads.com/lists/mythtv/users/150073?#150073
> > >
> > > Clips of all the unencrypted streams it found
> > > will be in the ./streams directory and a
> > > consolidated list in zap (channels.conf) format
> > > will be in list.txt
> > >
> > I got the latest CVS, but I can't get it to compile
> > without errors.
> > However, I have a feeling it's because I can't get
> > past step 1 ...
>
> Odd, that shouldn't be the case. You did a
> cvs -d :pserver:anonymous at linuxtv.org:/cvs/linuxtv co
> dvb-apps?
>
> You have the kernel-devel RPM installed?
>
> -Dennis
>

Yes, I have all that, but strangely, I just tried compiling again, and
it worked. Go figure, but I'm not going to complain about it :)

Mark