[mythtv-users] Firewire and DCT-6200
Curtis Stanford
curtis at stanfordcomputing.com
Wed Oct 19 19:14:21 UTC 2005
Congrats! My box is on Node 1 but I don't think that matters much.
You don't need to set the speed with plugctl. I just set it to 100 in
the mythtv-setup GUI and the backend sets it for me. I don't think it
matters that much what it's set to but 100 is plenty fast enough (not
sure about HD??)
I'm still having problems with some recordings being cut a bit short,
even though there are no errors on the backend. Otherwise, working
great! Next stop is to try some HD!
Have fun.
Curtis
On Oct 19, 2005, at 11:40 AM, Steve Adeff wrote:
> So I got my DCT-6200 the other day, bought a firewire cable,
> connected them
> got it running so I can capture streams, compiled 6200ch and can
> change
> channels. Its amazing how painless my MythTV experience has been,
> props to
> all involved.
>
> now on to why I responded to this thread...
>
> How do I set the speed from 400mbps to 100mbps? Is there any plugctl
> documentation? I can't seem to find any.
>
> also, I notice my box is on node 2, it works and all, and I see
> many people
> have this setup. I'm hoping anyone that does, if they encountered
> any issues
> that I should be aware of?
>
> I'd like to make sure it all works and check channels before going
> through the
> MythTV process, so any help in this is appreciated!
>
> Thanks!
> Steve
>
> On Sunday 16 October 2005 21:00, Alex Brekken wrote:
>
>> Wow!! Big improvement for me. As I posted earlier, my firewire
>> reliability
>> was only around 60% (at best). Since running these commands I'm
>> batting
>> 100% so far. It's only been a day, but I've tested it quite a bit and
>> haven't had any "false starts" from either live tv or recordings from
>> firewire. I also changed from point-to-point to broadcast, and
>> changed the
>> speed from 400 mbps to 100 mbps as suggested. I doubt these were
>> the reason
>> for the change since I've played with those settings quite a bit
>> before
>> with no improvement in reliability.
>>
>> Question: since I have no idea what these plugctl commands really
>> do, I'm
>> wondering if they need to be re-run anytime the machine is
>> rebooted...?
>>
>> Thanks Curtis for the great find! I know there's quite a few other
>> Firewire
>> users who have the same reliability problems, so I hope they give
>> this a
>> try.
>>
>> On 10/14/05, Curtis Stanford <curtis at stanfordcomputing.com> wrote:
>>
>>> OK, I think I've found something that helps with this firewire
>>> stuff.
>>> See this message:
>>>
>>> http://www.netzwerk-aktiv.com/pub/doc/newsletters/linux1394-user/
>>> html/
>>> 2344.html
>>>
>>> I followed the advice in the first paragraph and typed:
>>>
>>> plugctl -n 1 opcr[0].channel=63
>>> plugctl -n 1 opcr[0].bcast_connection=1
>>>
>>> Then I set the firewire connection to broadcast, 100Mbps in mythtv-
>>> setup.
>>>
>>> Now, the test-mpeg2 command works EVERY time (don't use the -r 1
>>> argument, just test-mpeg2). Also, mythtv "Watch TV" command works
>>> EVERY time where before it worked maybe 50% of the time or hung.
>>>
>>> I have yet to see if it helps with my recordings being cut short but
>>> I'll let the list know how it goes.
>>>
>>> If anyone else benefits from this, please post your results.
>>>
>>> Thanks
>>>
>>> Curtis
>>>
>>>
>>>
>>> _______________________________________________
>>> mythtv-users mailing list
>>> mythtv-users at mythtv.org
>>> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>>>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
More information about the mythtv-users
mailing list