[mythtv-users] Mandriva and PVR150 - Hardware upgrade/system reinstall results in no output

[Ryan Steffes]

Skipped content of type multipart/alternative-------------- next part --------------

ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.3.9 (development svn snapshot revision 2682) loading
ivtv: Linux version: 2.6.11-6mdk 686 gcc-3.4
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv info: Scanning PCI bus..
ivtv info: Found card #0
ivtv: Autodetected WinTV PVR 150 card (iTVC16 based)
ivtv info: base addr: 0xd8000000
ivtv info: Enabling pci device
ivtv info: Attempting to enable Bus Mastering
ivtv info: Bus Mastering Enabled.
ivtv info: 22 (rev 1) at 02:07.0, irq: 19, latency: 64, memory: 0xd8000000
ivtv info: attempting ioremap at 0xd8000000 len 0x00800000
ivtv info: attempting ioremap at 0xd9000000 len 0x00800000
ivtv info: attempting ioremap at 0xda000000 len 0x00010000
ivtv info: activating i2c...
ivtv i2c: i2c init
ivtv i2c: setting scl and sda to 1
tda9885/6/7: chip found @ 0x86
ivtv i2c: i2c client attach
ivtv: i2c attach to card #0 ok [client=tda9887, addr=43]
tveeprom: Hauppauge: model = 26552, rev = B268, serial# = 7827197
tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio processor = CX25843 (type = 25)
tveeprom: decoder processor = CX25843 (type = 1e)
ivtv i2c: i2c client attach
ivtv: i2c attach to card #0 ok [client=tveeprom[50], addr=50]
cx25840: loading /lib/modules/HcwMakoA.ROM
ivtv i2c: i2c client attach
ivtv: i2c attach to card #0 ok [client=cx25840, addr=44]
ivtv i2c: i2c client attach
ivtv: i2c attach to card #0 ok [client=wm8775, addr=1b]
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv i2c: i2c client attach
ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=61]
tuner: type set to 47 (LG NTSC (TAPE series)) by insmod option
tuner: The type=<n> insmod option will go away soon.
tuner: Please use the tuner=<n> option provided by
tuner: tv aard core driver (bttv, saa7134, ...) instead.
ivtv info: Active card count: 1.
ivtv info: Loaded module tveeprom
ivtv i2c: call_i2c_client
ivtv i2c: skipping client 0, addr 0x43
ivtv i2c: using client 1, addr 0x50
ivtv info: NTSC tuner detected
ivtv info: Loaded module tuner
ivtv info: Loaded module cx25840
ivtv i2c: call_i2c_client
ivtv i2c: skipping client 0, addr 0x43
ivtv i2c: skipping client 1, addr 0x50
ivtv i2c: using client 2, addr 0x44
ivtv info: Loaded module wm8775
ivtv info: Loaded module tda9887
ivtv info: Stopping VDM
ivtv info: Stopping AO
ivtv info: pinging (?) APU
ivtv info: Stopping VPU
ivtv info: Resetting Hw Blocks
ivtv info: Stopping SPU
ivtv info: Sleeping for 10ms
ivtv info: init Encoder SDRAM pre-charge
ivtv info: init Encoder SDRAM refresh to 1us
ivtv info: init Decoder SDRAM pre-charge
ivtv info: init Decoder SDRAM refresh to 1us
ivtv info: Sleeping for 600ms (600 recommended)
ivtv info: Card ready for firmware!
ivtv info: Loading encoder image
ivtv: loading /lib/modules/ivtv-fw-enc.bin
ivtv info: Sleeping for 100 ms
ivtv info: Sleeping for 100 ms
ivtv info: GPIO INIT
ivtv info: About to search for mailboxes
ivtv info: Searching for encoder mailbox
ivtv info: match: 0x34567812 at 0xd8e80104. match: 1
ivtv info: match: 0x56781234 at 0xd8e80108. match: 2
ivtv info: match: 0x78123456 at 0xd8e8010c. match: 3
ivtv info: found encoder mailbox!
ivtv info: Searching for decoder mailbox
ivtv info: match: 0x34567812 at 0xd9700104. match: 1
ivtv info: match: 0x56781234 at 0xd9700108. match: 2
ivtv info: match: 0x78123456 at 0xd970010c. match: 3
ivtv info: found decoder mailbox!
ivtv info: Getting firmware version..
ivtv info: Getting encoder firmware rev.
ivtv api: API Call: 0x000000c4 (IVTV_API_ENC_GETVER)
ivtv api: Releasing mailbox (before 0x00000007, after 0x00000000)
ivtv: Encoder revision: 0x02040011
ivtv info: v4l2 streams setup
ivtv info: Configuring WinTV PVR 150 card with 5 streams
ivtv info: Registered v4l2 device for encoder MPEG minor 0
ivtv: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv info: Registered v4l2 device for encoder YUV minor 32
ivtv: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv info: Registered v4l2 device for encoder VBI minor 224
ivtv: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv info: Registered v4l2 device for encoder PCM audio minor 24
ivtv: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
ivtv info: Registered v4l2 device for encoder radio minor 64
ivtv: Create encoder radio stream
ivtv info: Allocate encoder radio stream
ivtv info: Starting Threads
ivtv irq: Masking interrupts
ivtv i2c: call_i2c_client
ivtv i2c: skipping client 0, addr 0x43
ivtv i2c: skipping client 1, addr 0x50
ivtv i2c: skipping client 2, addr 0x44
ivtv i2c: skipping client 3, addr 0x1b
ivtv i2c: using client 4, addr 0x61
ivtv i2c: call_i2c_client
ivtv i2c: skipping client 0, addr 0x43
ivtv i2c: skipping client 1, addr 0x50
ivtv i2c: using client 2, addr 0x44
ivtv i2c: call_i2c_client
ivtv i2c: skipping client 0, addr 0x43
ivtv i2c: skipping client 1, addr 0x50
ivtv i2c: using client 2, addr 0x44
ivtv info: ivtv_enc_thread: pid = 9975, itv = 0xd6a00000
ivtv info: encoder thread sleeping 9975
ivtv info: ivtv_enc_vbi_thread: pid = 9976, itv = 0xd6a00000
ivtv info: encoder thread sleeping 9976
ivtv i2c: call_i2c_client
ivtv i2c: skipping client 0, addr 0x43
ivtv i2c: skipping client 1, addr 0x50
ivtv i2c: skipping client 2, addr 0x44
ivtv i2c: using client 3, addr 0x1b
ivtv info: Setting audio to input 0
ivtv i2c: call_i2c_client
ivtv i2c: skipping client 0, addr 0x43
ivtv i2c: skipping client 1, addr 0x50
ivtv i2c: using client 2, addr 0x44
ivtv ioctl: VIDIOC_S_STD
ivtv info: Switching standard to NTSC.
ivtv i2c: call_i2c_client
ivtv i2c: skipping client 0, addr 0x43
ivtv i2c: skipping client 1, addr 0x50
ivtv i2c: skipping client 2, addr 0x44
ivtv i2c: skipping client 3, addr 0x1b
ivtv i2c: using client 4, addr 0x61
ivtv i2c: call_i2c_client
ivtv i2c: using client 0, addr 0x43
ivtv i2c: call_i2c_client
ivtv i2c: skipping client 0, addr 0x43
ivtv i2c: skipping client 1, addr 0x50
ivtv i2c: using client 2, addr 0x44
ivtv ioctl: VIDIOC_S_FREQUENCY
ivtv api: API Call: 0x000000d2 (IVTV_API_PAUSE_ENCODER)
ivtv api: Releasing mailbox (before 0x00000007, after 0x00000000)
ivtv info: Disabling digitizer
ivtv i2c: call_i2c_client
ivtv i2c: skipping client 0, addr 0x43
ivtv i2c: skipping client 1, addr 0x50
ivtv i2c: using client 2, addr 0x44
ivtv info: v4l2 ioctl: set frequency 1076
ivtv i2c: call_i2c_client
ivtv i2c: skipping client 0, addr 0x43
ivtv i2c: skipping client 1, addr 0x50
ivtv i2c: skipping client 2, addr 0x44
ivtv i2c: skipping client 3, addr 0x1b
ivtv i2c: using client 4, addr 0x61
ivtv i2c: call_i2c_client
ivtv i2c: using client 0, addr 0x43
ivtv api: API Call: 0x000000d3 (IVTV_API_REFRESH_INPUT)
ivtv info: Enabling digitizer
ivtv i2c: call_i2c_client
ivtv i2c: skipping client 0, addr 0x43
ivtv i2c: skipping client 1, addr 0x50
ivtv i2c: using client 2, addr 0x44
ivtv api: API Call: 0x000000d2 (IVTV_API_PAUSE_ENCODER)
ivtv api: Releasing mailbox (before 0x00000007, after 0x00000000)
ivtv info: Finished with Mute
ivtv: Initialized WinTV PVR 150, card #0
ivtv: ====================  END INIT IVTV  ====================