[mythtv-users] Harmony Remote and screen blanking

[Andrew Golden]

Thanks to all who responded. I don't have enough time to build one and was
hoping for a quick solution. I see that the PVR-150 comes with a remote.
Anyone used the receiver from that with the Harmony and Myth?

 

  _____  

From: mythtv-users-bounces at mythtv.org
[mailto:mythtv-users-bounces at mythtv.org] On Behalf Of stanley kamithi
Sent: Thursday, September 29, 2005 11:52 AM
To: marius at schrecker.org; Discussion about mythtv
Subject: Re: [mythtv-users] Harmony Remote and screen blanking

 

There are 2 definitions for each button because its the raw codes of a rc5
remote signal.
rc5 remote  doesn't send the same signal everytime u press athe same button.
it flips one bit/byte (can't remember now) when u press a button. so there
are really 2 signals for  the "power" button.

the usb-uirt2 driver doesn't seem to understand the lircd.conf hauppauge
file that comes with lirc.. so i had to generate my own using  irrecord.


I've attached my .lircrc file for your review.

In the harmony member website, i just matched my .lircrc button names to the
buttons names specified for the pvr250 remote on the harmony member website.






On 9/29/05, Marius Schrecker <marius at schrecker.org> wrote:

Stanley wrote:
> I use USB-UIRT2 with the transmit/receive patch.
>
> Transmit side controls my Cable setupbox to change the channels when I
> tune
> mythtv.
>
> Receive side, mimics a hauppauge pvr-250 remote. For some reason, i 
> couldn't
> use the lirc standard file for the pvr-250 remote. USB-UIRT2 LIRC driver
> doesn't seem to understand RC4 signal definitions, so I had to hack it
> myself.
>
> So on my Harmony 880 remote, I select "Hauppauge PVR-250" as my Mythtv 
> remote..
>
> works great !
>
> my lircd.conf file is attached.
>


Thanks for the lircd.conf file. Are those the recommended key names for
Myth? Does anyone use different / more key mappings? 

Your conf file looks very different from mine, with two sets of long codes
for each command, but I'm guessing that's something to do with sending
/receiving??


Marius
_______________________________________________ 
mythtv-users mailing list
mythtv-users at mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mythtv.org/pipermail/mythtv-users/attachments/20050929/e1ba417a/attachment.htm