[mythtv-users] Ivtv dies when recording at 1am

[Jon Vanderwoude]

has any one seen a problem like this where ivtv will just stop sending
information to myth?

I've got a pvr 250 and any time I try to record a program that is on
around 1am it dies out.  1am is also when my pvr does it's
transcodeing of all the shows recorded that day...

Myth seems to think that it is still recording, but there is nothing
more being recorded, and I get messages like below in my
/var/log/messages

Sep 29 01:00:02 localhost kernel: saa7115: decoder set picture
bright=127 contrast=63 saturation=63 hue=0
Sep 29 01:00:02 localhost last message repeated 3 times
Sep 29 01:00:02 localhost kernel: saa7115: decoder disable output
Sep 29 01:00:02 localhost kernel: saa7115: decoder enable output
Sep 29 01:00:02 localhost kernel: saa7115: decoder set picture
bright=127 contrast=63 saturation=63 hue=0
Sep 29 01:00:02 localhost last message repeated 3 times
Sep 29 01:00:02 localhost kernel: saa7115: decoder set size
Sep 29 01:00:02 localhost kernel: ivtv: Allocate DMA encoder MPEG
stream: 128 x 32768 buffers (4096KB total)
Sep 29 01:00:02 localhost kernel: ivtv: Setup VBI API header
0x0000bd0d pkts 1 buffs 4 ln 24 sz 1456
Sep 29 01:00:02 localhost kernel: ivtv: Setup VBI start 0x0018ea04
frames 4 fpi 1 lines 0x000000f1
Sep 29 01:00:03 localhost kernel: saa7115: decoder disable output
Sep 29 01:00:03 localhost kernel: saa7115: decoder enable output
Sep 29 01:06:48 localhost kernel: ivtv: ENC: REG_DMAXFER 2 wait failed


now I don't think that transcoding video's is going to suck up enough
of my hard drive bandwidth to cause any problems (segate 200 GB sata
drives software raid 0)  but I can't seem to track down why this is
happening.

Any help would be greatly apprecaited.