[mythtv-users] mythtv suddenly stopped working: How to debug?

Boris Carlitov boris_qd at yahoo.com
Mon Apr 10 13:33:42 UTC 2006


I've been using my hd 3000 card for several months
without any problems.  Suddenly myth (0.18) doesn't
work anymore an I'm at a loss for how to debug it.  I
haven't really changed my installation.  Here's what
I've looked at so far.

When I tune to a channel using azap it works fine.

I usually use the card to record over the air digital
video broadcasts with myth.  When I try to view live
tv in myth (view prerecorded stuff works fine but of
course it won't record anything  new) the backend
reports:

--------------------------------------------------------------------------------------------
ladybug video # mythbackend
2006-04-09 23:31:35.886 New DB connection, total: 1
Starting up as the master server.
2006-04-09 23:31:35.896 New DB connection, total: 2
2006-04-09 23:31:35.899 New DB connection, total: 3
2006-04-09 23:31:35.902 DVB#0 DVB SI Table Parser
Started
2006-04-09 23:31:35.903 DVB#0 Using DVB card 0, with
frontend Oren OR51132 VSB/QAM Frontend.
2006-04-09 23:31:35.904 DVB#0 ERROR - Unable to find
channel in database.
2006-04-09 23:31:35.904 DVB#0 ERROR - Failed to get
channel options for channel 3.
2006-04-09 23:31:35.913 New DB scheduler connection
2006-04-09 23:31:35.920 mythbackend version:
0.18.1.20050510-1 www.mythtv.org
2006-04-09 23:31:35.921 Enabled verbose msgs :
important general
2006-04-09 23:31:37.916 Reschedule requested for id
-1.
2006-04-09 23:31:38.131 Scheduled 55 items in 0.2 =
0.17 match + 0.04 place
2006-04-09 23:31:38.134 Seem to be woken up by USER
2006-04-09 23:31:45.925 New DB connection, total: 4
2006-04-09 23:32:02.158 MainServer::HandleAnnounce
Playback
2006-04-09 23:32:02.158 adding: ladybug as a client
(events: 0)
2006-04-09 23:32:02.195 MainServer::HandleAnnounce
Playback
2006-04-09 23:32:02.195 adding: ladybug as a client
(events: 1)
2006-04-09 23:32:02.210 MainServer::HandleAnnounce
Playback
2006-04-09 23:32:02.210 adding: ladybug as a client
(events: 0)
2006-04-09 23:32:02.243 MainServer::HandleAnnounce
Playback
2006-04-09 23:32:02.243 adding: ladybug as a client
(events: 0)
2006-04-09 23:32:02.258 adding: ladybug as a remote
ringbuffer
2006-04-09 23:32:02.278 Changing from None to
WatchingLiveTV
2006-04-09 23:32:02.290 DVB#0 Recorder: Card opened
successfully (using TS mode).
2006-04-09 23:32:02.291 DVB#0 ERROR - No PIDS set,
please correct your channel setup.
2006-04-09 23:32:03.295 DVB#0 WARNING - No data from
card in 1 second.[/code]
--------------------------------------------------------------------------------------------

and the frontend says:

--------------------------------------------------------------------------------------------
user at ladybug ~ $ mythfrontend
2006-04-09 23:31:56.076 New DB connection, total: 1
Total desktop width=1600, height=1200, numscreens=1
2006-04-09 23:31:56.083 Using screen 0, 1600x1200 at
0,0
2006-04-09 23:31:56.086 mythfrontend version:
0.18.1.20050510-1 www.mythtv.org
2006-04-09 23:31:56.086 Enabled verbose msgs :
important general
2006-04-09 23:31:56.220 Switching to square mode
(G.A.N.T.)
2006-04-09 23:31:56.744 Registering Internal as a
media playback plugin.
2006-04-09 23:31:56.753 Registering MythDVD DVD Media
Handler as a media handler
2006-04-09 23:31:56.753 Registering MythDVD VCD Media
Handler as a media handler
2006-04-09 23:32:02.113 New DB connection, total: 2
2006-04-09 23:32:02.136 Connecting to backend server:
127.0.0.1:6543 (try 1 of 5)
2006-04-09 23:32:02.150 Using protocol version 15
2006-04-09 23:32:02.202 Using protocol version 15
2006-04-09 23:32:07.346 taking too long to be allowed
to read..
2006-04-09 23:32:12.351 taking too long to be allowed
to read..
2006-04-09 23:32:21.351 Waited 4 seconds for data to
become available, waiting again...
2006-04-09 23:32:25.356 Waited 4 seconds for data to
become available, waiting again...
2006-04-09 23:32:29.360 Waited 4 seconds for data to
become available, waiting again...
2006-04-09 23:32:33.364 Waited 4 seconds for data to
become available, waiting again...
2006-04-09 23:32:37.368 Waited 4 seconds for data to
become available, waiting again...
2006-04-09 23:32:41.374 Waited 4 seconds for data to
become available, waiting again...
2006-04-09 23:32:45.377 Waited 4 seconds for data to
become available, waiting again...
2006-04-09 23:32:49.381 Waited 4 seconds for data to
become available, waiting again...
2006-04-09 23:32:49.381 Waited 14 seconds for data to
become available, aborting
Couldn't read file:
rbuf://127.0.0.1:6543/usr/local/media/video/myth/buffer/ringbuf1.nuv
2006-04-09 23:32:49.434 Changing from None to
WatchingLiveTV
2006-04-09 23:32:49.434 Decoder not alive, and trying
to play..
2006-04-09 23:32:49.505 Changing from None to None
--------------------------------------------------------------------------------------------

How can I start tracking down the problem?  It was
just working 2 days ago!.

I'm sticking some more useful information at the end
to help with the debuging.

Thanks!
--------------------------------------------------------------------------------------

Here's my dmesg output:

--------------------------------------------------------------------------------------------
user at ladybug /usr/local/media/video $ dmesg
Linux version 2.6.14-gentoo-r4 (root at ladybug) (gcc
version 3.4.4 (Gentoo 3.4.4-r1, ssp-3.4.4-1.0,
pie-8.7.8)) #1 PREEMPT Mon Jan 16 19:55:25 EST 2006
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800
(usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000
(reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000
(reserved)
 BIOS-e820: 0000000000100000 - 000000003fff0000
(usable)
 BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI
NVS)
 BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI
data)
 BIOS-e820: 00000000e0000000 - 00000000f0000000
(reserved)
 BIOS-e820: 00000000fec00000 - 0000000100000000
(reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 262128
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 225280 pages, LIFO batch:31
  HighMem zone: 32752 pages, LIFO batch:15
DMI 2.3 present.
ACPI: RSDP (v000 Nvidia                               
) @ 0x000f91c0
ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD
0x00000000) @ 0x3fff3040
ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD
0x00000000) @ 0x3fff30c0
ACPI: SSDT (v001 PTLTD  POWERNOW 0x00000001  LTP
0x00000001) @ 0x3fff9680
ACPI: SRAT (v001 AMD    HAMMER   0x00000001 AMD 
0x00000001) @ 0x3fff9780
ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD
0x00000000) @ 0x3fff9880
ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD
0x00000000) @ 0x3fff95c0
ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT
0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x4008
Allocating PCI resources starting at 50000000 (gap:
40000000:a0000000)
Built 1 zonelists
Kernel command line: root=/dev/ram0 init=/linuxrc
ramdisk=8192 real_root=/dev/hda3 udev
Initializing CPU#0
CPU 0 irqstacks, hard=c0513000 soft=c0512000
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 1809.463 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7,
524288 bytes)
Inode-cache hash table entries: 65536 (order: 6,
262144 bytes)
Memory: 1032256k/1048512k available (3209k kernel
code, 15296k reserved, 742k data, 188k init, 131008k
highmem)
Checking if this processor honours the WP bit even in
supervisor mode... Ok.
Calibrating delay using timer specific routine..
3622.63 BogoMIPS (lpj=7245269)
Mount-cache hash table entries: 512
CPU: After [/code]generic identify, caps: 078bfbff
e3d3fbff 00000000 00000000 00000001 00000000 00000001
CPU: After vendor identify, caps: 078bfbff e3d3fbff
00000000 00000000 00000001 00000000 00000001
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 078bfbff e3d3fbff 00000000
00000010 00000001 00000000 00000001
mtrr: v2.0 (20020519)
CPU: AMD Athlon(tm) 64 Processor 3000+ stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 0c28)
checking if image is initramfs... it is
softlockup thread 0 started up.
Freeing initrd memory: 1867k freed
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: PCI BIOS revision 3.00 entry at 0xfb600, last
bus=5
PCI: Using MMCONFIG
ACPI: Subsystem revision 20050902
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:09.0
Boot video device is 0000:05:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11
12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 *5 7 9 10 11
12 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 *10 11
12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11
12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11
12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs *3 4 5 7 9 10 11
12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11
12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 10 *11
12 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs *3 4 5 7 9 10 11
12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 *10 11
12 14 15)
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 *11
12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 7 9 10 11
12 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11
12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11
12 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 11
12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11
12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0,
disabled.

ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0,
disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0,
disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0,
disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0,
disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0,
disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0,
disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0,
disabled.
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0,
disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0,
disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0,
disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0,
disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0,
disabled.
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0,
disabled.
ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0,
disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 13 devices
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If
it helps, post a report
pnp: 00:00: ioport range 0x4000-0x407f could not be
reserved
pnp: 00:00: ioport range 0x4080-0x40ff has been
reserved
pnp: 00:00: ioport range 0x4400-0x447f has been
reserved
pnp: 00:00: ioport range 0x4480-0x44ff could not be
reserved
pnp: 00:00: ioport range 0x4800-0x487f has been
reserved
pnp: 00:00: ioport range 0x4880-0x48ff has been
reserved
PCI: Bridge: 0000:00:09.0
  IO window: d000-dfff
  MEM window: fc000000-fdffffff
  PREFETCH window: fea00000-feafffff
PCI: Bridge: 0000:00:0b.0
  IO window: c000-cfff
  MEM window: fe900000-fe9fffff
  PREFETCH window: fe800000-fe8fffff
PCI: Bridge: 0000:00:0c.0
  IO window: b000-bfff
  MEM window: fe700000-fe7fffff
  PREFETCH window: fe600000-fe6fffff
PCI: Bridge: 0000:00:0d.0
  IO window: a000-afff
  MEM window: fe500000-fe5fffff
  PREFETCH window: fe400000-fe4fffff
PCI: Bridge: 0000:00:0e.0
  IO window: 9000-9fff
  MEM window: f4000000-fbffffff
  PREFETCH window: d8000000-dfffffff
PCI: Setting latency timer of device 0000:00:09.0 to
64
PCI: Setting latency timer of device 0000:00:0b.0 to
64
PCI: Setting latency timer of device 0000:00:0c.0 to
64
PCI: Setting latency timer of device 0000:00:0d.0 to
64
PCI: Setting latency timer of device 0000:00:0e.0 to
64
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096
bytes)
SGI XFS with ACLs, security attributes, realtime,
large block numbers, no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
PCI: Setting latency timer of device 0000:00:0b.0 to
64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ.
Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
Allocate Port Service[pcie03]
PCI: Setting latency timer of device 0000:00:0c.0 to
64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ.
Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
Allocate Port Service[pcie03]
PCI: Setting latency timer of device 0000:00:0d.0 to
64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ.
Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
Allocate Port Service[pcie03]
PCI: Setting latency timer of device 0000:00:0e.0 to
64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ.
Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
Allocate Port Service[pcie03]
vesafb: NVIDIA Corporation, nv43 Board - p229h3  ,
Chip Rev    (OEM: NVIDIA)
vesafb: VBE version: 3.0
vesafb: VBIOS/hardware supports DDC2 transfers
      Display is GTF capable
vesafb: monitor limits: vf = 120 Hz, hf = 107 kHz, clk
= 230 MHz
vesafb: scrolling: redraw
Console: switching to colour frame buffer device 80x30
vesafb: framebuffer at 0xd8000000, mapped to
0xf8880000, using 24576k, total 131072k
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at
0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports,
IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
mice: PS/2 mouse device common for all mice
io scheduler noop registered
io scheduler deadline registered
RAMDISK driver initialized: 16 RAM disks of 8192K size
1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision:
7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
NFORCE-CK804: chipset revision 242
NFORCE-CK804: not 100% native mode: will probe irqs
later
NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller
    ide0: BM-DMA at 0xfb00-0xfb07, BIOS settings:
hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xfb08-0xfb0f, BIOS settings:
hdc:DMA, hdd:DMA
Probing IDE interface ide0...
input: AT Translated Set 2 keyboard on isa0060/serio0
logips2pp: Detected unknown logitech mouse model 89
input: ImExPS/2 Logitech Explorer Mouse on
isa0060/serio1
hda: Maxtor 53073U6, ATA DISK drive
hdb: ST3200822A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: _NEC DVD_RW ND-3540A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 60030432 sectors (30735 MB) w/2048KiB Cache,
CHS=59554/16/63, UDMA(66)

hda: cache flushes not supported
 hda: hda1 hda2 hda3
hdb: max request size: 1024KiB
hdb: 390721968 sectors (200049 MB) w/8192KiB Cache,
CHS=24321/255/63, UDMA(100)
hdb: cache flushes supported
 hdb: hdb1 hdb2 < hdb5 >
hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB
Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 4
EISA: Detected 0 cards.
Advanced Linux Sound Architecture Driver Version
1.0.10rc1 (Mon Sep 12 08:13:09 2005 UTC).
ALSA device list:
  No soundcards found.
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 6,
262144 bytes)
TCP established hash table entries: 262144 (order: 8,
1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144
bytes)
TCP: Hash tables configured (established 262144 bind
65536)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
ACPI wakeup devices:
HUB0 XVR0 XVR1 XVR2 XVR3 USB0 USB2 MMAC MMCI UAR1
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 188k freed
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] ->
GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:02.1 to
64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: new USB bus registered,
assigned bus number 1
ehci_hcd 0000:00:02.1: irq 5, io mem 0xfeb00000
PCI: cache line size of 64 is not supported by device
0000:00:02.1
ehci_hcd 0000:00:02.1: park 0
ehci_hcd 0000:00:02.1: USB 2.0 initialized, EHCI 1.00,
driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
USB Universal Host Controller Interface driver v2.3
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller
(OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 3
PCI: setting IRQ 3 as level-triggered
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUBA] ->
GSI 3 (level, low) -> IRQ 3
PCI: Setting latency timer of device 0000:00:02.0 to
64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered,
assigned bus number 2
ohci_hcd 0000:00:02.0: irq 3, io mem 0xfebff000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
sl811: driver sl811-hcd, 19 May 2005
ieee1394: Initialized config rom entry `ip1394'
sbp2: $Rev: 1306 $ Ben Collins <bcollins at debian.org>
ieee1394: sbp2: Driver forced to serialize I/O
(serialize_io=1)
ieee1394: sbp2: Try serialize_io=0 for better
performance
libata version 1.12 loaded.
sata_nv version 0.8
ACPI: PCI Interrupt Link [LSID] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LSID] ->
GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:07.0 to
64
ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma
0xF600 irq 11
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma
0xF608 irq 11
ata1: dev 0 cfg 49:2f00 82:346b 83:7f01 84:4003
85:3469 86:3c01 87:4003 88:203f
ata1: dev 0 ATA, max UDMA/100, 625142448 sectors:
lba48
nv_sata: Primary device added
nv_sata: Primary device removed
nv_sata: Secondary device added
nv_sata: Secondary device removed
ata1: dev 0 configured for UDMA/100
scsi0 : sata_nv
ata2: no device found (phy stat 00000000)
scsi1 : sata_nv
  Vendor: ATA       Model: WDC WD3200JD-22K  Rev: 08.0
  Type:   Direct-Access                      ANSI SCSI
revision: 05
SCSI device sda: 625142448 512-byte hdwr sectors
(320073 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 625142448 512-byte hdwr sectors
(320073 MB)
SCSI device sda: drive cache: write back
 sda:<4>nv_sata: Primary device added
nv_sata: Primary device removed
nv_sata: Secondary device added
nv_sata: Secondary device removed
 sda1
Attached scsi disk sda at scsi0, channel 0, id 0, lun
0
device-mapper: 4.4.0-ioctl (2005-01-12) initialised:
dm-devel at redhat.com

ReiserFS: hda3: warning: sh-2021: reiserfs_fill_super:
can not find reiserfs on hda3
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 500464k swap on /dev/hda2.  Priority:-1
extents:1 across:500464k
EXT3 FS on hda3, internal journal
i2c /dev entries driver
Real Time Clock Driver v1.12
Linux agpgart interface v0.101 (c) Dave Jones
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [LNK3] ->
GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:05:00.0 to
64
NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 
1.0-6629  Wed Nov  3 13:12:51 PST 2004
Linux video capture interface: v1.00
cx2388x dvb driver version 0.0.5 loaded
CORE cx88[0]: subsystem: 7063:3000, board: pcHDTV
HD3000 HDTV [card=22,autodetected]
TV tuner 52 at 0x1fe, Radio tuner -1 at 0x1fe
ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 5
ACPI: PCI Interrupt 0000:01:07.2[A] -> Link [LNK2] ->
GSI 5 (level, low) -> IRQ 5
cx88[0]/2: found at 0000:01:07.2, rev: 5, irq: 5,
latency: 32, mmio: 0xfc000000
cx88[0]/2: cx2388x based dvb card
DVB: registering new adapter (cx88[0]).
DVB: registering frontend 0 (Oren OR51132 VSB/QAM
Frontend)...
ip_tables: (C) 2000-2002 Netfilter core team
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hdb5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
EXT3-fs warning: maximal mount count reached, running
e2fsck is recommended
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c00
i2c_adapter i2c-2: nForce2 SMBus adapter at 0x4c40
ACPI: PCI Interrupt Link [LACI] enabled at IRQ 3
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LACI] ->
GSI 3 (level, low) -> IRQ 3
PCI: Setting latency timer of device 0000:00:04.0 to
64
intel8x0_measure_ac97_clock: measured 54827 usecs
intel8x0: clocking to 46995
forcedeth.c: Reverse Engineered nForce ethernet
driver. Version 0.41.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LMAC] ->
GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:0a.0 to
64
eth0: forcedeth.c: subsystem: 01462:7125 bound to
0000:00:0a.0
cx2388x v4l2 driver version 0.0.5 loaded
ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [LNK2] ->
GSI 5 (level, low) -> IRQ 5
cx88[0]/0: found at 0000:01:07.0, rev: 5, irq: 5,
latency: 32, mmio: 0xfd000000
tuner 0-0061: chip found @ 0xc2 (cx88[0])
tuner 0-0061: type set to 52 (Thomson DDT 7610
(ATSC/NTSC))
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
cx88[0]/0: registered device radio0
cx2388x blackbird driver version 0.0.5 loaded
input: PC Speaker
FDC 0 is a post-1991 82077
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.3 (8191 buckets, 65528 max) -
236 bytes per conntrack
ipt_recent v0.3.1: Stephen Frost <sfrost at snowman.net>.
 http://snowman.net/projects/ipt_recent/
--------------------------------------------------------------------------------------------

and for completeness lspci produces:

---------------------------------------------------------------------------------------------
00:00.0 Memory controller: nVidia Corporation CK804
Memory Controller (rev a3)
00:01.0 ISA bridge: nVidia Corporation CK804 ISA
Bridge (rev a3)
00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
00:02.0 USB Controller: nVidia Corporation CK804 USB
Controller (rev a2)
00:02.1 USB Controller: nVidia Corporation CK804 USB
Controller (rev a3)
00:04.0 Multimedia audio controller: nVidia
Corporation CK804 AC'97 Audio Controller (rev a2)
00:06.0 IDE interface: nVidia Corporation CK804 IDE
(rev f2)
00:07.0 IDE interface: nVidia Corporation CK804 Serial
ATA Controller (rev f3)
00:09.0 PCI bridge: nVidia Corporation CK804 PCI
Bridge (rev a2)
00:0a.0 Bridge: nVidia Corporation CK804 Ethernet
Controller (rev a3)
00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE
Bridge (rev a3)
00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE
Bridge (rev a3)
00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE
Bridge (rev a3)
00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE
Bridge (rev a3)
01:07.0 Multimedia video controller: Conexant
CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
01:07.2 Multimedia controller: Conexant CX23880/1/2/3
PCI Video and Audio Decoder [MPEG Port] (rev 05)
05:00.0 VGA compatible controller: nVidia Corporation
NV43 [GeForce 6600] (rev a2)
----------------------------------------------------------------------------------------------------

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam
protection around 
http://mail.yahoo.com 

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 


More information about the mythtv-users mailing list