[mythtv-users] KWorld ATSC-110 Question
Craig G.
craig at goranson.org
Thu Dec 28 17:39:26 UTC 2006
To use it both as an analog and a digital tuner, I had configure Myth to
look at it as two different cards. The Analog half's performance isn't that
great, as there is not hardware mpeg encoder. But it works. If I remember
correctly for the analog side you need to load the saa7134_dvb and
saa7134_alsa modules, then configure a V4L card entry to point at the
resulting video and audio inputs. Can give better details tommorrow when I
get back home, am visiting relatives and don't have access to my myth box.
----- Original Message -----
From: "John" <jharitos at yahoo.com>
To: <mythtv-users at mythtv.org>
Sent: Thursday, December 28, 2006 8:27 AM
Subject: Re: [mythtv-users] KWorld ATSC-110 Question
Thanks for the help. I went into WinXP and started
BeyondTV and it detected and displayed NTSC signal in
the lower RF input but Myth can't. I noticed there was
a new SVN that added a patch to add an Analog button
in DVB setup. I went to this and selected the kworld
card and it still won't display anything but snow.
--------------------------------------------------------------------------------
I have one of these cards, and I appologize that I
can't give more details
at the moment, as I can't readily check at the moment
and forgot exactly how
I have it hooked up. But the KWorld ATSC-110 had an
NTSC and a ATSC tuner.
One of the RF connections goes to the NTSC tuner, the
other to the ATSC
tuner. So you have to decide if you are going to try
to get ATSC signal off
of cable tv or OTA, and hook up the cables
accordingly.
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
_______________________________________________
mythtv-users mailing list
mythtv-users at mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
More information about the mythtv-users
mailing list