[mythtv-users] Urgent Help Request: ATSC QAM256 scan in mythtv-setup returns
Jake Palmer
jakep_82 at hotmail.com
Fri Dec 29 17:28:22 UTC 2006
>I need a little help from someone who:
>a) has a working HD3000 card setup;
>b) to receive QAM256 encoded cable TV.
>
>I have an HD3000 which can tune and play digital cable streams with azap
>and mplayer: the hardware works. However, channel scanning with a recent
>SVN version returns no channels. There is a TRAC ticket for this but I
>am no good at parsing code. I can however test that my card can work, IF
>PROPERLY set up. Accordingly, I need some mysql database entries.
>
>Would some kind soul run the following mysql queries from the mysql
>prompt and post the results? Either here or directly to me.
>Please and thank you.
>
>Please ensure that the entries all relate to the same card/ same
>multiplex frequency/ same channel etc. as the intention is to determine
>what the actual working setup is...since mine is gone and mythtv-setup
>does not seem to set up. Unless you have more than one DVB card, these
>should all be one line, except for the output of dtv_privatetypes.
>Please include the mysql field headers, as your schema may differ from
>my setup and this may be part of the problem. Please ensure that the
>setup you are using is a working channel for your HD3000.
>
># mysql -u mythtv -pmythtv mythconverg
>mysql>
>
> select * from cardinput where inputname = 'DVBInput';
>
>Take note of the value of sourceid (say '2')and startchan ( really
>channum) ('108') in this output, for use below.
>
> select * from capturecard where defaultinput = 'DVBInput';
>
> select * from channel where sourceid = '2' and channum = '108';
>
>Take note of the value of mplexid ( say '2') in this output for use below.
>
> select * from dtv_multiplex where mplexid = '2';
>
> select * from dtv_privatetypes;
>
>If you are using ONLY a cable feed, then the diseqc_config and
>diseqc_tree tables should be empty. I think. Please confirm.
>
>Thanks in advance and I hope you have a Happy New Year..
>
>I hope to have one too, with my card working again!
>
>Geoff
Why not make a channels.conf file? That's how I originally set up QAM on my
system. Myth imported it without any problems.
Jake
_________________________________________________________________
Experience the magic of the holidays. Talk to Santa on Messenger.
http://clk.atdmt.com/MSN/go/msnnkwme0080000001msn/direct/01/?href=http://imagine-windowslive.com/minisites/santabot/default.aspx?locale=en-us
More information about the mythtv-users
mailing list