[mythtv-users] Conexant CX23880/1/2/3
jan
jan at talentex.demon.co.uk
Wed Feb 1 06:01:22 UTC 2006
Hi Matthew,
Thanks for your reply. I've been away for a couple of weeks, so I didn't
have time to reply.
Matthew Geier wrote:
> jan wrote:
>
>> What kind of capture card is Conexant CX23880/1/2/3? I have tried all
>> variants, but it makes no difference,
>
>
> All this means is that you have a card with a CX88 family chip on it.
> There are dozens of variations on CX88 based cards, the linux CX88
> driver has this huge table of cards in it, that handles all the variations.
>
> Id be checking the dmesg output at boot/module load time to check your
> card is actually being properly detected.
>
This is what dmesg has to say:
CORE cx88[0]: subsystem: 107d:6611, board: Leadtek Winfast 2000XP Expert
[card=5,autodetected]
TV tuner 44 at 0x1fe, Radio tuner -1 at 0x1fe
cx88[0]: Leadtek Winfast 2000XP Expert config: tuner=38, eeprom[0]=0x01
input: cx88 IR (Leadtek Winfast 2000XP as /class/input/input3
cx88[0]/0: found at 0000:00:0a.0, rev: 5, irq: 19, latency: 32, mmio:
0xf5000000
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
cx88[0]/0: registered device radio0
- to me it looks as if it is loaded OK, but I didn't notice the '2000XP'
thing before. Do you think it means that it is one of the infamous
Windows only sort of cards (like eg. the winmodems)? I didn't buy it
myself, so I didn't get a say in what card was chosen.
/jan
More information about the mythtv-users
mailing list