[mythtv-users] Failed to load module tveeprom

Claude Gélinas agr. claude at phyto.qc.ca
Sun Feb 5 21:52:04 UTC 2006


dmesg is giving me two error message:

Failed to load module tveeprom

and

Failed to load module msp3400

as seen in the dmesg log bellow

I'm runnig fc4 amd x64 pvr350 installed following Jarod's guide

what's wrong

ivtv:  ==================== START INIT IVTV ====================
ivtv:  version 0.4.2 (tagged release) loading
ivtv:  Linux version: 2.6.15-1.1830_FC4 SMP gcc-4.0
ivtv:  In case of problems please include the debug info between
ivtv:  the START INIT IVTV and END INIT IVTV lines, along with
ivtv:  any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected WinTV PVR 350 card (cx23415 based)
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
GSI 20 sharing vector 0x3A and IRQ 20
ACPI: PCI Interrupt 0000:05:06.0[A] -> Link [APC1] -> GSI 16 (level,
low) -> IRQ 58
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
ivtv0: Failed to load module tveeprom
ivtv0 warning: i2c client addr: 0x50 not found for command 0x0!
ivtv0: Error -19 reading Hauppauge eeprom.
ivtv0: Possible causes: the tveeprom module was not loaded, or
ivtv0: the eeprom kernel module was loaded before the tveeprom module.
tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
saa7115 2-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21]
saa7127 2-0044: saa7127 found @ 0x88 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=saa7127, addr=44]
ivtv0: Failed to load module msp3400
tda9887 2-0043: chip found @ 0x86 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43]
ivtv0: Could not detect tuner standard, defaulting to NTSC.
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02040024
ivtv0 warning: Encoder Firmware can be buggy, use version 0x02040011 or
0x02050032.
ivtv0: Decoder revision: 0x02020023
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB
total)
ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB
total)
ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB
total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB
total)
ivtv0: Create encoder radio stream
ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB
total)
ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB
total)
ivtv0: Create decoder VOUT stream
ivtv0: Allocate DMA decoder YUV stream: 24 x 43200 buffers (1024KB
total)
ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
ivtv0 warning: i2c client addr: 0x40 not found for command 0x40086d11!
ivtv0 warning: i2c client addr: 0x40 not found for command 0x80287610!
ivtv0 warning: i2c client addr: 0x40 not found for command 0x40287611!
tuner 2-0061: tuner type not set
ivtv0 warning: i2c client addr: 0x40 not found for command 0x40085618!
ivtv0 warning: i2c client addr: 0x40 not found for command 0x80287610!
ivtv0 warning: i2c client addr: 0x40 not found for command 0x40287611!
tuner 2-0061: tuner type not set
ivtv0 warning: i2c client addr: 0x40 not found for command 0x402c5639!
ivtv0 warning: i2c client addr: 0x40 not found for command 0x80287610!
ivtv0 warning: i2c client addr: 0x40 not found for command 0x40287611!
ivtv0: Initialized WinTV PVR 350, card #0
ivtv:  ====================  END INIT IVTV  ====================

-- 
-----
Claude Gélinas agr., dta
Phyto Ressources inc.
==============================================================================
Varennes, Québec, Canada           Tél.: (450) 652 9764,   Fax.:(450)
652 6182
     Des questions sur les insectes et maladies des plantes
ornementales ?
                 Want to know more about ornamental plant pest ?
                            http://www.phyto.qc.ca






More information about the mythtv-users mailing list