[mythtv-users] PVR-150 shows up as a PVR-250 with IVTV 4.2/3 ? Anyone else have this issue?

Jeff Thurston jeff at legendsds.com
Thu Feb 23 19:33:02 UTC 2006


I've been searching the ivtv list for a while now and have yet to find a 
solutions, nor get a response so i figured I would try here,
Using ivtv 0.4.0 from ATRPMS my PVR-150 worked great, now with the 
upgrade it shows up as a PVR-250, and also fails to work. I get a black 
screen, and mythbackend locks up whenever I try to use the card.

This is the second tuner in a system with a PVR-350 as well.

Thanks for any help you guys can offer!


Also would anyone happen to know what this line means in the ivtv init?

"ivtv1 warning: i2c client addr: 0x21 not found for command 0x40085618!"

-Jeff

/\/\/\/\/\/\/\/\/\/\/\/\/\/\/

FC4 2.6.15

<modprobe.conf>
alias eth0 b44
alias snd-card-0 snd-intel8x0
options snd-card-0 index=0
options snd-intel8x0 index=0
remove snd-intel8x0 { /usr/sbin/alsactl store 0 >/dev/null 2>&1 || : ; 
}; /sbin/modprobe -r --ignore-remove snd-intel8x0
alias usb-controller ehci-hcd
alias usb-controller1 uhci-hcd
alias ieee1394-controller ohci1394

# ivtv setup
alias char-major-81 ivtv
alias char-major-81-0 ivtv
alias char-major-81-1 ivtv
#alias msp3400 msp3400-itvt
#alias tveeprom tveeprom-ivtv
#alias tuner tuner-ivtv
#alias tda9887 tda9887-ivtv
install ivtv /sbin/modprobe --ignore-install ivtv; /sbin/modprobe ivtv-fb

<dmesg>
ivtv:  ======================  NEXT CARD  ======================
ivtv1: Autodetected WinTV PVR 250 card (cx23416 based)
PCI: Enabling device 0000:02:0c.0 (0014 -> 0016)
ACPI: PCI Interrupt 0000:02:0c.0[A] -> Link [LNKE] -> GSI 11 (level, 
low) -> IRQ 11
ivtv1: Unreasonably low latency timer, setting to 64 (was 32)
ivtv1: i2c attach to card #1 ok [client=tveeprom, addr=50]
tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #1)
ivtv1: i2c attach to card #1 ok [client=(tuner unset), addr=61]
spurious 8259A interrupt: IRQ7.
tveeprom 2-0050: Hauppauge model 26052, rev C199, serial# 8248373
tveeprom 2-0050: tuner model is TCL 2002N 5H (idx 99, type 50)
tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 2-0050: audio processor is CX25843 (idx 37)
tveeprom 2-0050: decoder processor is CX25843 (idx 30)
tveeprom 2-0050: has no radio, has IR remote
ivtv1 warning: i2c client addr: 0x21 not found for command 0x8004646b!
ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv1: Encoder revision: 0x02040024
ivtv1 warning: Encoder Firmware can be buggy, use version 0x02040011 or 
0x02050032.
ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv1: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv1: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB 
total)
tuner 2-0061: type set to 50 (TCL 2002N)
ivtv1 warning: i2c client addr: 0x21 not found for command 0x40085618!
ivtv1 warning: i2c client addr: 0x21 not found for command 0xc0045627!
ivtv1 warning: i2c client addr: 0x40 not found for command 0x40086d11!
ivtv1 warning: i2c client addr: 0x40 not found for command 0x80287610!
ivtv1 warning: i2c client addr: 0x40 not found for command 0x40287611!
ivtv1 warning: i2c client addr: 0x40 not found for command 0x40085618!
ivtv1 warning: i2c client addr: 0x21 not found for command 0x40085618!
ivtv1 warning: i2c client addr: 0x40 not found for command 0x80287610!
ivtv1 warning: i2c client addr: 0x40 not found for command 0x40287611!
ivtv1 warning: i2c client addr: 0x21 not found for command 0x40045613!
ivtv1 warning: i2c client addr: 0x40 not found for command 0x402c5639!
ivtv1 warning: i2c client addr: 0x21 not found for command 0x40045612!
ivtv1 warning: i2c client addr: 0x40 not found for command 0x80287610!
ivtv1 warning: i2c client addr: 0x40 not found for command 0x40287611!
ivtv1: Initialized WinTV PVR 250, card #1
ivtv:  ====================  END INIT IVTV  ====================


More information about the mythtv-users mailing list