[mythtv-users] DPI setting wont take
Robin Hill
myth at robinhill.me.uk
Fri Feb 24 14:23:04 UTC 2006
On Fri Feb 24, 2006 at 01:22:43PM +0100, Jurgen Kramer wrote:
> I am trying to change the DPI setting from the default 75 x 75 to 24 x
> 19, which should be the correct setting according to the nvidia driver
> (taken from the EDID data when my screen was connected through a DVI-
> HDMI) connector. My 32" screen is currently connected through VGA using
> a 1360x768 resolution. Problem is that the driver and/or X will not use
> my custom DPI setting:
>
> (II) NVIDIA(0): Virtual screen size determined to be 1360 x 768
> (==) NVIDIA(0): DPI set to (75, 75)
>
> I have the following lines in my xorg.conf device settings section:
>
> Option "UseEdidDpi" "FALSE"
> Option "DPI" "24 x 19"
>
> Any ideas what I am doing wrong?
>
There is no DPI option - you need to set the DPI via the DisplaySize
option (in the Monitor section of your xorg.conf). This specifies the
size of the display (in mm). I wouldn't advise doing this though - most
of the MythTV menus assume 100dpi and things will certainly look wrong
if you go down to 24x19! I'd say that, unless you're planning on doing
CAD/CAM work and actually measuring thing on the screen, then you'll be
best setting the DisplaySize get a 100dpi resolution.
HTH,
Robin
--
___
( ' } | Robin Hill <robin at robinhill.me.uk> |
/ / ) | Little Jim says .... |
// !! | "He fallen in de water !!" |
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 191 bytes
Desc: not available
Url : http://mythtv.org/pipermail/mythtv-users/attachments/20060224/da928779/attachment.pgp
More information about the mythtv-users
mailing list