[mythtv-users] Re: Lost Sound on PVR-350
john.p.harvey at btinternet.com
Sat Jan 7 17:23:46 UTC 2006
So my suggestion is go back to basics and make sure we know where it is
Presumably you are feeding the audio out of the 350 to the line in of the
So for livetv/recordings to fail to play audio there are several failure
1) The recoding/tv has no audio
2) The playback from the 350 isn't generating any audio.
3) The line in of the audio card is muted/volume turned down etc.
To check 1)
Record something new and then play it with mplayer and check that you get
audio out of your audio card.
To check 2) Try tacking the line out of the 350 straight into the
tv/speakers or whatever and play something from myth.
If this works then the problem is 3) if it doesn't then we need to work out
why the 350 audio isn't working.
Alternatively assuming you are using a new x driver for the 350 you could
disable the 350 playback and it will revert to using Xv and audio will be
played through the audio card. This should work as a temporary workaround
though I play everything this way now since the latest dvb recordings can't
be played using the 350's decoder anyway.
> -----Original Message-----
> From: mythtv-users-bounces at mythtv.org [mailto:mythtv-users-
> bounces at mythtv.org] On Behalf Of Kirk Bocek
> Sent: 07 January 2006 17:07
> To: david.a.ellis at convergys.com; Discussion about mythtv
> Subject: Re: [mythtv-users] Re: Lost Sound on PVR-350
> David Ellis wrote:
> > 2) Reinstall ivtv "make install" during the install it will tell you if
> > module conflicts - and tell you how to resolve them. You may need to
> > a few times before its "clean".
> I executed all the suggested mv commands during the ivtv install. I am
> sure there are no module conflicts.
> Thanks for the suggestion.
> mythtv-users mailing list
> mythtv-users at mythtv.org
More information about the mythtv-users