[mythtv-users] mythbackend not starting on slave (I know...)

Bruce Markey bjm at lvcm.com
Sat Jan 14 02:49:15 UTC 2006


Kevin Kuphal wrote:
> Steve Malenfant wrote:
>> I couldn't find the answer anywhere...  "service mythbackend start"
>> don't work on my salve... It's not an IP configuration issue... 
>> mythfrontend works as root and mythtv user on the slave.  Also when I
>> execute manually everything works fine.
>>
>> So if do "/usr/bin/mythbackend --daemon --logfile
>> /var/log/mythtv/mythbackend.log --pidfile /var/run/mythbackend.pid"
>> the server starts just fine (minus the problem with the channel here):
>>
>> Running as a slave backend.
>> 2006-01-13 20:48:46.281 New DB connection, total: 2
>> 2006-01-13 20:48:46.288 mythbackend: MythBackend started as a slave backend
>> 2006-01-13 20:48:46.326 DVB#0 DVB SI Table Parser Started
>> 2006-01-13 20:48:46.361 DVB#0 Using DVB card 0, with frontend Broadcom
>> BCM3510 VSB/QAM frontend.
>> 2006-01-13 20:48:46.368 DVB#0 ERROR - Unable to find channel in database.
>> 2006-01-13 20:48:46.370 DVB#0 ERROR - Failed to get channel options
>> for channel 5-1.
>> 2006-01-13 20:48:46.374 Closing DVB channel
>> 2006-01-13 20:48:47.357 mythbackend version: 0.18.2.20051227-1 www.mythtv.org
>> 2006-01-13 20:48:47.362 Enabled verbose msgs : important general
>> 2006-01-13 20:48:48.379 Connecting to master server: 192.168.11.24:6543
>> 2006-01-13 20:48:48.397 Connected successfully
>>
>> And when I use "service mythbackend start" :
>>
>> 2006-01-13 20:44:16.104 New DB connection, total: 1
>> 2006-01-13 20:44:16.112 Unable to connect to database!
>> 2006-01-13 20:44:16.114 Driver error was [1/2002]:
>> QMYSQL3: Unable to connect
>> Database error was:
>> Can't connect to local MySQL server through socket
>> '/var/lib/mysql/mysql.sock' (2)
>>
>> I'm not sure what's the difference but it doesn't work using the
>> "service" with remote database.
>>   
> I'm guessing when you run it manually you do not run it as root?  It 
> sounds like you have not followed all the steps in the documentation at 
> mythtv.org for running a slave backend, specifically about the 
> database.  Remember: You need to have your slave backend connect to the 
> *same* database your master backend connects to.   It is quite common 
> for the distribution of linux chosen to run mythtv will install a 
> database server on each installation so it is also quite common for 
> people running slave backends to end up connecting their slave to the 
> local database rather than the master.  Read the documentation careful 
> and check your config.

Well, the problem is clearly that it is finding a valid mysql.txt
when start from the commandline but not when started in the init
script. This is most likely the $HOME environment variable and not
a lack of reading mythtv docs ;-).

Root's $HOME may be /root when logged in but may be / during init.
You could "export $HOME=/root" in the script or make a synlink for
/mysql.txt or copy mysql.txt to / or whatever.

--  bjm


More information about the mythtv-users mailing list