[mythtv-users] FC5 and Fusion DVB-T Dual Digital
Anthony Goddard
anthony at bondimaging.com
Fri Jul 28 02:47:52 UTC 2006
Hi There,
Are the tuning problems specific to SBS and channel 9?
My drivers and frontend are fine now.
Check out this reply on the linux-dvb list... I havent tested my tuning
yet, but by the looks of it I'm expecting some issues!
http://www.linuxtv.org/pipermail/linux-dvb/2006-July/011657.html
When my setup was running on FC4, I have SBS and Channel 9 tuning
problems.
That link also has interesting info regarding the ffmpeg version, and
SBS.
Hope that helps,
Anthony
-----Original Message-----
From: mythtv-users-bounces at mythtv.org
[mailto:mythtv-users-bounces at mythtv.org] On Behalf Of Kevin Hayes
Sent: Friday, 28 July 2006 11:26 AM
To: mythtv-users at mythtv.org
Subject: Re: [mythtv-users] FC5 and Fusion DVB-T Dual Digital
On Thu, 27 Jul 2006 11:51:21 +1000
"Anthony Goddard" <anthony at bondimaging.com> wrote:
> Hi There,
> Thanks for the info.
>
> Currently "dmesg | grep dvb-usb" returns the following:
>
> [mythtv at mythtv ~]$ dmesg | grep dvb-usb
> dvb-usb: found a 'DViCO FusionHDTV DVB-T Dual USB' in cold state, will
> try to load a firmware
> dvb-usb: downloading firmware from file 'dvb-usb-bluebird-01.fw'
> dvb-usb: generic DVB-USB module successfully deinitialized and
> disconnected.
> dvb-usb: found a 'DViCO FusionHDTV DVB-T Dual USB' in warm state.
> dvb-usb: will pass the complete MPEG2 transport stream to the software
> demuxer.
> dvb-usb: no frontend was attached by 'DViCO FusionHDTV DVB-T Dual USB'
> dvb-usb: schedule remote query interval to 150 msecs.
> dvb-usb: DViCO FusionHDTV DVB-T Dual USB successfully initialized and
> connected.
>
>
> So far, all I've done to the box (after installing FC5) is:
>
> 1)yum upgrade (about 700mb of updates) 2)yum install kernel-devel, yum
> install kernel-doc 3)ran the firmware script, and placed the .fw file
> in /lib/firmware 4)added the repo's from the wilson guide (atrmps,
> freshrpms) 5)ran yum install mythtv-suite 6)ran yum upgrade again
> which updated things from the mythtv-suite install (about 10mb I
> think)
>
>
>
>
> Any ideas? :-(
>
Hi Anthony,
i have recently got this card working successfully using
http://www.itee.uq.edu.au/~chrisp/Linux-DVB/DVICO/
though i still have some tuning problems it is properly recognized in
mythtv-setup and i can tune a few channels.
Towards the end of dmesg i have ...
...
dvb-usb: found a 'DViCO FusionHDTV DVB-T Dual USB' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software
demuxer.
DVB: registering new adapter (DViCO FusionHDTV DVB-T Dual USB).
DVB: registering frontend 0 (Zarlink MT352 DVB-T)...
input: IR-receiver inside an USB DVB receiver as /class/input/input2
dvb-usb: schedule remote query interval to 150 msecs.
dvb-usb: DViCO FusionHDTV DVB-T Dual USB successfully initialized and
connected.
usbcore: registered new driver dvb_usb_cxusb ...
hth
--
Kevin Hayes
_______________________________________________
mythtv-users mailing list
mythtv-users at mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
More information about the mythtv-users
mailing list