[mythtv-users] No Sound with FC4 (2.6.16) and IVTV (0.6.2)
Brad Fuller
bradallenfuller at yahoo.com
Sat Jun 3 19:47:39 UTC 2006
Mark Prinz wrote:
> I am having problems with IVTV 0.6.2 and sound. Picture works great,
> but I can't get any audio.
>
> Kernel:
> 2.6.16-1.2111_1.rhfc4.cubbi_swsusp2smp
>
> Installed Packages:
> perl-Video-ivtv-0.13-7.rhfc4.at
> ivtv-kmdl-2.6.16-1.2111_1.rhfc4.cubbi_swsusp2smp-0.6.2-110.rhfc4.at
> ivtv-firmware-1.8a-10.at
> ivtv-0.6.2-110.rhfc4.at
>
> Quick background...did an FC3 to FC4 upgrade on my MythTV box,
> ultimately couldn't get sound to work, wiped the install clean and
> tried compiling IVTV directly...ran into issues.
>
> I wiped everything clean, including firmware files that I had laid
> down, yum installed ivtv-firmware, ivtv-kmdl, and ivtv from
> atrpms.net. Picture works greak...but no sound.
>
> I cleaned up the ivtv files to make sure they only exist in
> '/lib/modules/$KVER/updates/drivers/media/video/'
>
> Any suggestions?
>
> BTW, I use OSS; freshly
> installed after the FC4 upgrade (previous MythTV recordings and
> MythMusic work fine).
>
> Here is my dmesg output:
> ivtv: ==================== START INIT IVTV ====================
> ivtv: version 0.6.2 (development snapshot compiled on Tue May 23
> 12:03:49 2006) loading
> ivtv: Linux version: 2.6.16-1.2111_1.rhfc4.cubbi_swsusp2smp SMP 686
> REGPARM 4KSTACKS gcc-4.0
> ivtv: In case of problems please include the debug info between
> ivtv: the START INIT IVTV and END INIT IVTV lines, along with
> ivtv: any module options, when mailing the ivtv-users mailinglist.
> ivtv0: Autodetected Hauppauge WinTV PVR-250 card (cx23416 based)
> tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
> saa7115 1-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
> msp3400 1-0040: MSP3435G-B6 found @ 0x80 (ivtv i2c driver #0)
> ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> ivtv0: Encoder revision: 0x02050032
> ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
> ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
> ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
> ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
> ivtv0: Initialized Hauppauge WinTV PVR-250, card #0
> ivtv: ==================== END INIT IVTV ====================
>
> And, here is my 'ivtvctl -a' output
> ioctl IVTV_IOC_G_CODEC ok
> Codec parameters
> aspect : 2
> audio : 0x00e9
> bframes : 3
> bitrate_mode: 0
> bitrate : 4400000
> bitrate_peak: 16000000
> dnr_mode : 0
> dnr_spatial : 0
> dnr_temporal: 8
> dnr_type : 0
> framerate : 0
> framespergop: 15
> gop_closure : 1
> pulldown : 0
> stream_type : 0
> ioctl VIDIOC_G_FMT ok
> Type : Video Capture
> Width : 480
> Height : 480
> ioctl VIDIOC_QUERYCAP ok
> Driver name : ivtv
> Card type : Hauppauge WinTV PVR-250
> Bus info : 0000:03:04.0
> Driver version: 1538
> Capabilities : 0x01030051
> ioctl: VIDIOC_ENUMINPUT
> Input : 0
> Name : Tuner 1
> Type : 0x00000001
> Audioset: 0x00000007
> Tuner : 0x00000000
> Standard: 0x000000000000B000 ( NTSC )
> Status : 0
>
> Input : 1
> Name : S-Video 1
> Type : 0x00000002
> Audioset: 0x00000007
> Tuner : 0x00000000
> Standard: 0x0000000000FFFFFF ( PAL NTSC SECAM )
> Status : 0
>
> Input : 2
> Name : Composite 1
> Type : 0x00000002
> Audioset: 0x00000007
> Tuner : 0x00000000
> Standard: 0x0000000000FFFFFF ( PAL NTSC SECAM )
> Status : 0
>
> Input : 3
> Name : S-Video 2
> Type : 0x00000002
> Audioset: 0x00000007
> Tuner : 0x00000000
> Standard: 0x0000000000FFFFFF ( PAL NTSC SECAM )
> Status : 0
>
> Input : 4
> Name : Composite 2
> Type : 0x00000002
> Audioset: 0x00000007
> Tuner : 0x00000000
> Standard: 0x0000000000FFFFFF ( PAL NTSC SECAM )
> Status : 0
>
> Input : 5
> Name : Composite 3
> Type : 0x00000002
> Audioset: 0x00000007
> Tuner : 0x00000000
> Standard: 0x0000000000FFFFFF ( PAL NTSC SECAM )
> Status : 0
> ioctl VIDIOC_G_INPUT ok
> Video input = 0
> ioctl: VIDIOC_ENUMOUTPUT
> ioctl VIDIOC_G_OUTPUT failed: Invalid argument
> ioctl: VIDIOC_ENUMAUDIO
> Input : 0
> Name : Tuner 1
>
> Input : 1
> Name : Line In 1
>
> Input : 2
> Name : Line In 2
> ioctl VIDIOC_G_AUDIO ok
> Audio input = 0: Tuner 1
> ioctl VIDIOC_G_FREQUENCY ok
> Frequency = 1076
> ioctl: VIDIOC_ENUMSTD
> index : 0
> ID : 0x000000000000000F
> Name : PAL-BGH
> Frame period: 1/25
> Frame lines : 625
>
> index : 1
> ID : 0x00000000000000E0
> Name : PAL-DK
> Frame period: 1/25
> Frame lines : 625
>
> index : 2
> ID : 0x0000000000000010
> Name : PAL-I
> Frame period: 1/25
> Frame lines : 625
>
> index : 3
> ID : 0x0000000000000100
> Name : PAL-M
> Frame period: 1001/30000
> Frame lines : 525
>
> index : 4
> ID : 0x0000000000000200
> Name : PAL-N
> Frame period: 1/25
> Frame lines : 625
>
> index : 5
> ID : 0x0000000000000400
> Name : PAL-Nc
> Frame period: 1/25
> Frame lines : 625
>
> index : 6
> ID : 0x00000000000D0000
> Name : SECAM-BGH
> Frame period: 1/25
> Frame lines : 625
>
> index : 7
> ID : 0x0000000000320000
> Name : SECAM-DK
> Frame period: 1/25
> Frame lines : 625
>
> index : 8
> ID : 0x0000000000400000
> Name : SECAM-L
> Frame period: 1/25
> Frame lines : 625
>
> index : 9
> ID : 0x0000000000800000
> Name : SECAM-L'
> Frame period: 1/25
> Frame lines : 625
>
> index : 10
> ID : 0x0000000000001000
> Name : NTSC-M
> Frame period: 1001/30000
> Frame lines : 525
>
> index : 11
> ID : 0x0000000000002000
> Name : NTSC-J
> Frame period: 1001/30000
> Frame lines : 525
>
> index : 12
> ID : 0x0000000000008000
> Name : NTSC-K
> Frame period: 1001/30000
> Frame lines : 525
> ioctl VIDIOC_G_STD ok
> Video standard = 0x00003000
> ioctl: VIDIOC_QUERYCTRL
> Brightness = 128
> Contrast = 63
> Saturation = 63
> Hue = 0
> Volume = 58950
> Balance = 32768
> Bass = 32768
> Treble = 32768
> Mute = 0
>
> Loudness = 0
may not be your problem, but I upgraded recently and inadvertently
installed Video4Linux kernel module. I had no sound. So, I removed it,
rebooted and sound resurfaced. I don't know what this would be, and it
might not have been the problem. But, I have sound now.
brad
More information about the mythtv-users
mailing list