[mythtv-users] air2pc + HD3000 not working together

[Steve Malenfant]

The support for Air2Pc didn't come before 2.6.15.  I had to compile
the dvb drivers myself before 2.6.15 came out.  *Maybe* in 2.6.14.

Steve

On 2/28/06, Dan Valega <zippyelectron at gmail.com> wrote:
> Thanks to the 2 list users who posted the firmware file(s) I now have
> the firmware installed for a
> air2pc 1st gen card using BCM3510 frontend. I still can't get it to
> load the firmware, even though the card is reported in dmesg
>
> drivers/media/dvb/b2c2/skystar2.c: FlexCopIIB(rev.195) chip found
> drivers/media/dvb/b2c2/skystar2.c: the chip has 38 hardware filters
> skystar2: A frontend driver was not found for device 13d0/2103
> subsystem 13d0/2103
>
> I can still use my HD3000 card OK, and it moved up to card 1 from card
> 0 in mythsetup.
>
> This is on FC3_X86_64 with  kernel 2.6.12-1.1381
>
> Everything I've read says the support for the card is in the kernel &
> I thought I just had to put the firmware in the right place, what am I
> not doing to get it to load firmware ?
> Thanks
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>