[mythtv-users] Sanity questions setting up a pcHDTV HD3000 card
R. G. Newbury
newbury at mandamus.org
Fri Mar 31 21:35:03 UTC 2006
jborn at charter.net wrote:
> Couple of sanity questions about setting an pcHDTV Card along side a PVR500 card.
>
> backend and frontend on same box. Currently I'm outputting to a PC Monitor. Once everything is working I'll be porting to a HDTV.
>
> General:
> Is the master backend NTSC or ATSC?
I have the 'Default' setting on NTSC. Then in the Channel Editor in
mythtv-setup the digital channels are set to ATSC.. This makes sense for
me as there are far more analog channels than digital ones.
> Capture Cards:
> While setting up the Capture card for the pcHDTV under mythtv version .19 I can specify a "video source" Currently I have this as /dev/video32. All the guides seem to use this, but when you test HDTV from the command line you use /dev/dvb/adapter0/dvr0. Why the descrepency?
Sounds like you have the NTSC module loaded.....Do a modprobe -r cx8800
followed by a modprobe cx88_dvb and you will now (should!) have a
/dev/dvb/adapter0 entry.
If you really want digital, including HD (and don't confuse them) then
you need the cx88_dvb module loaded.
>
> I'm assuming default tuner is "Tuner">
Yes If you are using the coax input to the HD card.
> Video Sources:
>
> I currently have "default" Channel frequency table for the "Charter Digital" (pcHDTV) and "us-cable" for the PVR500. Is that correct?
> I also somehow ended up with a blank video source. I have 1 "Charter Analog", 2 blank, 3 "Charter Digital". Can I delete 2 via SQL?
Go to labs.zap2it.com and set up your channel lineups. You want an
analog to feed the PVR, and a Digital.
Go into mythtv-setup.
Set up the cards.
Create your source lineups, choosing Analog for number 1 and Digital for
2. You can select Retrieve Lineups from Source here and it will do a
mythfilldatabase. DO NOT DO A CHANNEL SCAN.
Associate the cards with their sources.... PVR <-> Analog..... HD3000
<-> digital.
You can check things in the Channel Editor and should set the Type to
ATSC for the digital channels.
Then exit mythtv-setup and run mythfilldatabase again.
If you do a channel scan at any point before here, you can easily end up
with duplicate channels in your tables...
Geoff
More information about the mythtv-users
mailing list