[mythtv-users] Can record from LiveTV but not from Guide or Manual

[Mario Camou R]

On 5 May 2006, at 17:38, Mario Camou R wrote:

>> On 5 May 2006, at 02:12, Michael T. Dean wrote:
>>
>>> On 05/04/2006 03:23 PM, Mario Camou R wrote:
>>>
>>>> I have MythTV 0.19 running on a Gentoo box with a Hauppage PVR-250
>>>> card.
>>>>
>>>> LiveTV works with no problems. However, whenever I try to record
>>>> (whether from the Guide or a Manual recording) I get no output  
>>>> file.
>>>>
>>>> I have checked the backend logs and I only see a "Started  
>>>> Recording"
>>>> and a "Finished Recording" message with the exact same time (the
>>>> start time of the recording). No other messages.
>>>>
>>>> This setup was working correctly with MythTV 0.18.
>>>>
>>>> Any ideas?
>>
>>> Fix the associations of video sources to inputs in mythtv-setup.
>>>
>>> Mike
>>
>> I've already done that (Live TV wouldn't work otherwise). Still no  
>> go.
>
> A couple more data points. Sometimes in the logs the "Finished"  
> entry has a timestamp BEFORE the "Starting" entry:
>
> 11  	5492  	scheduler  	5  	0  	2006-05-05 15:52:02  	tv  	Started  
> recording  	Rubí: channel 3 on cardid 1, sourceid 1
> 12 	5491 	scheduler 	5 	0 	2006-05-05 15:52:01 	tv 	Finished  
> recording 	Rubí: channel 3
>
> Also, when viewing LiveTV I constantly get the following message in  
> the logs:
>
> [mpeg @ 0xb7739360]Parser not found for Codec Id: 94210 !

I think I found something.

I set --verbose=all on the backend and found the following message  
after digging trhough the logs:

2006-05-05 17:41:34.975 ChannelBase: Could not find input: Tuner 0 on  
card when setting channel 1
2006-05-05 17:41:34.976 TVRec(1) Error: Failed to set channel to 1.  
Reverting to kState_None

Now, when running mythtv-setup I don't see any mentions of "Tuner 0",  
everything is now "Tuner 1" (I actually deleted the whole setup and  
did it again from the start). I assume that "Tuner 0" comes from  
SOMEwhere in the database. Any ideas where it might be? I could do a  
manual update if I only knew which table to look at.

Thanks,
-Mario