[mythtv-users] Static noise from AC3 passthrough
erictsmith at gmail.com
Wed May 31 23:43:45 UTC 2006
Using ALSA:digital-hw results in the same static as using ALSA:digital?
On 5/31/06, Michael T. Dean <mtdean at thirdcontact.com> wrote:
> On 05/30/06 21:43, Eric Smith wrote:
> >One more dumb question. What can i set the mixer device to in order
> >to have internal volume control in myth when the audio device is set
> >to iec958?
> You can't have internal volume control in Myth when the audio device is
> set to iec958 unless you redefine the card-provided "iec958" virtual
> device (using a "!iec958" definition in your ALSA configuration file) to
> include the use of the softvol plugin /and/ you disable passthrough.
> However, since you have to put a definition in your ALSA configuration
> file, anyway, it makes more sense to use a different name instead of
> overriding the card-provided virtual device. And, unfortunately,
> disabling passthrough puts you back where you started at the beginning
> of the thread...
> The "right" approach with digital output is to use the volume controls
> on the receiver that's decoding the signal.
> BTW, completely backtracking on what I said in my first post to this
> thread, you should be able to use "ALSA:digital-hw" with the exact same
> results as "ALSA:iec958". (And I would be forever grateful if you would
> confirm this for me.)
> mythtv-users mailing list
> mythtv-users at mythtv.org
More information about the mythtv-users