[mythtv-users] Converted MCE PC to MythTV - HDTV question

[Iohan Reyes]

Not sure if this indicates that it's working or not.. I haven't tried it
again in the past couple of days, but I'll pay attention to see if the
OSD is B&W...

Here are the relevant logs from when I tried it...

2006-11-05 17:01:50.682 VideoOutputXv: XvMCTex: Init failed
2006-11-05 17:01:50.683 VideoOutputXv: XVideo Adaptor Name: 'NV17 Video
Overlay'
2006-11-05 17:01:52.349 Video timing method: USleep with busy wait
2006-11-05 17:01:53.042 VideoOutputXv: XvMCTex: Init failed
2006-11-05 17:01:53.044 VideoOutputXv: XvMC Adaptor Name: 'NV17 Video
Overlay'
2006-11-05 17:01:53.879 VideoOutputXv: ProcessFrameXvMC: Tried to reuse
frame but failed
2006-11-05 17:01:53.880 VideoOutputXv: ProcessFrameXvMC: Called without
frame
2006-11-05 17:01:53.880 AFD: Opened codec 0xa27adc0, id(MPEG2VIDEO_XVMC)
type(Video)
2006-11-05 17:01:54.058 VideoOutputXv: ProcessFrameXvMC: Tried to reuse
frame but failed
2006-11-05 17:01:54.058 VideoOutputXv: ProcessFrameXvMC: Called without
frame



-----Original Message-----
From: mythtv-users-bounces at mythtv.org
[mailto:mythtv-users-bounces at mythtv.org] On Behalf Of Justin The Cynical
Sent: Wednesday, November 08, 2006 3:18 PM
To: Discussion about mythtv
Subject: Re: [mythtv-users] Converted MCE PC to MythTV - HDTV question

Iohan Reyes wrote:
> Is there something I'm doing wrong then with my XvMC implementation?
> All I did was create a file called /etc/X11/XvMCConfig with one line
in
> it:
> 
> libXvMCNVIDIA_dynamic.so.1
> 
> Then I changed the option in Mythfrontend's playback options screen to
> use Standard XvMC.  Sorry if I'm missing something obvious, I was only
> following the wiki page and there was no mention of anything more
> involved than that.
> 
> How do I know if it is actually using the NVIDIA XvMC libs or
something
> else?  I only based my assumption that it was because the CPU
> utilization dropped about 20% and it was less herky jerky than
non-XvMC.

The XvMCConfig matches mine and it sounds like it's working as well 
considering your CPU has dropped.

To make sure, turn on the logging when you start the front end next 
time.  Also the OSD will be B&W when XvMC is on.

Which version of myth are you trying to run?
_______________________________________________
mythtv-users mailing list
mythtv-users at mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users