[mythtv-users] lircrc being ignored?
Nick Ellson
grimm at nickellson.com
Wed Oct 4 03:39:11 UTC 2006
(wow, I should have at least mentioned this in my first post, sorry about
that)
/etc/lircd.conf is still my hand made one for StreamZap.
irw gets every button right (and they are still as touchy as they were
when I bought it ;)
As for LIRC/IVTV using the serial? Maybe now.. I rebooted again, now I
have ZERO remote, not even them defaults :\
What did I do, gad....
OK, here are details: (if needed)
pixie etc # uname -a
Linux pixie 2.6.18-gentoo #4 Mon Oct 2 10:44:56 PDT 2006 i686 Intel(R)
Pentium(R) 4 CPU 2.80GHz GenuineIntel GNU/Linux
pixie etc # lircd -v
lircd 0.8.0
pixie etc # cat /etc/lircd.conf
#
# this config file was automatically generated
# using lirc-0.7.1-CVS(serial) on Fri Feb 4 23:20:56 2005
#
# contributed by Christoph Bartelmus
#
# brand: Streamzap
# model no. of remote control: PC Remote
# devices being controlled by this remote: USB receiver
#
begin remote
name Streamzap_PC_Remote
bits 6
flags RC5|CONST_LENGTH
eps 30
aeps 100
one 889 889
zero 889 889
plead 889
pre_data_bits 8
pre_data 0xA3
gap 108344
toggle_bit 2
begin codes
0 0x00
1 0x01
2 0x02
3 0x03
4 0x04
5 0x05
6 0x06
7 0x07
8 0x08
9 0x09
POWER 0x0A
MUTE 0x0B
CH_UP 0x0C
VOL_UP 0x0D
CH_DOWN 0x0E
VOL_DOWN 0x0F
UP 0x10
LEFT 0x11
OK 0x12
RIGHT 0x13
DOWN 0x14
MENU 0x15
EXIT 0x16
PLAY 0x17
PAUSE 0x18
STOP 0x19
|<< 0x1A
>>| 0x1B
RECORD 0x1C
<< 0x1D
>> 0x1E
RED 0x20
GREEN 0x21
YELLOW 0x22
BLUE 0x23
end codes
end remote
pixie etc # cat /home/pixie/.lircrc
#Power Button
begin
prog = irexec
button = Power
repeat = 4
config = /usr/local/bin/mythpowerbutton.sh
end
# Channel Up
#begin
#prog = mythtv
#button = ChUp
#repeat = 2
#config = Up
#end
# Channel Down
#begin
#prog = mythtv
#button = ChDown
#repeat = 2
#config = Down
#end
# OK/Select
begin
prog = mythtv
button = OK
config = Space
end
# Play
begin
prog = mythtv
button = Play
config = Return
end
# Stop
begin
prog = mythtv
button = Stop
config = Esc
end
# Escape/Exit/Back
begin
prog = mythtv
button = Exit
config = Esc
end
# Power Off/Exit
#begin
#prog = mythtv
#button = Power
#config = Esc
#end
# CHUP becomes tuner change
begin
prog = mythtv
button = ChUp
config = Y
end
# ChDown becomes Time Stretch
begin
prog = mythtv
button = ChDown
config = A
end
# Pause
begin
prog = mythtv
button = Pause
repeat = 3
config = P
end
# Mute
begin
prog = mythtv
button = Mute
repeat = 2
config = F9
end
begin
prog = mythtv
button = SeekBack
repeat = 2
config = Left
end
# Rewind (10 sec default)
begin
prog = mythtv
button = SeekFw
repeat = 2
config = Right
end
# Skip forward (10 min default)
begin
prog = mythtv
button = TrackNext
repeat = 2
config = PgDown
end
# Skip backward (10 min default)
begin
prog = mythtv
button = TrackPrev
repeat = 2
config = PgUp
end
# Record
begin
prog = mythtv
button = Record
repeat = 2
config = R
end
# Volume Up
begin
prog = mythtv
button = VolUp
repeat = 2
config = ]
end
# Volume Down
begin
prog = mythtv
button = VolDown
repeat = 2
config = [
end
# Widescreen
begin
prog = mythtv
button = RED
repeat = 2
config = W
end
# Display EPG while in live TV,
# View selected show while in EPG
begin
prog = mythtv
button = Menu
repeat = 2
config = M
end
# Scroll Right
begin
prog = mythtv
button = Right
repeat = 2
config = Right
end
# Scroll Left
begin
prog = mythtv
button = Left
repeat = 2
config = Left
end
# Scroll Up
begin
prog = mythtv
button = Up
repeat = 2
config = Up
end
# Scroll down
begin
prog = mythtv
button = Down
repeat = 2
config = Down
end
# Bring up OSD info
begin
prog = mythtv
button = GO
repeat = 2
config = I
end
# Info
begin
prog = mythtv
button = GREEN
repeat = 2
config = I
end
# Seek to previous commercial cut point
begin
prog = mythtv
button = YELLOW
repeat = 2
config = Q
end
# Seek to next commercial cut point
begin
prog = mythtv
button = BLUE
repeat = 2
config = Z
end
# Numbers 0-9
begin
prog = mythtv
button = 0
repeat = 2
config = 0
end
begin
prog = mythtv
button = 1
repeat = 2
config = 1
end
begin
prog = mythtv
button = 2
repeat = 2
config = 2
end
begin
prog = mythtv
button = 3
repeat = 2
config = 3
end
begin
prog = mythtv
button = 4
repeat = 2
config = 4
end
begin
prog = mythtv
button = 5
repeat = 2
config = 5
end
begin
prog = mythtv
button = 6
repeat = 2
config = 6
end
begin
prog = mythtv
button = 7
repeat = 2
config = 7
end
begin
prog = mythtv
button = 8
repeat = 2
config = 8
end
begin
prog = mythtv
button = 9
repeat = 2
config = 9
end
### MPlayer lirc setup
# Show OSD
begin
prog = mplayer
button = MENU
repeat = 3
config = osd
end
# Pause playback
begin
prog = mplayer
button = PAUSE
repeat = 3
config = pause
end
# Skip ahead a minute if playing
# If paused, resume playing
begin
prog = mplayer
button = PLAY
repeat = 3
config = seek +1
end
# Stop playback and exit
begin
prog = mplayer
button = STOP
repeat = 3
config = quit
end
# Mute
begin
prog = mplayer
button = MUTE
repeat = 3
config = mute
end
# Seek back 10 seconds
begin
prog = mplayer
button = REW
repeat = 3
config = seek -10
end
# Seek forward 30 seconds
begin
prog = mplayer
button = FFW
repeat = 3
config = seek +30
end
# Quit
begin
prog = mplayer
button = BACK/EXIT
repeat = 3
config = quit
end
# Seek forward 10 minutes
begin
prog = mplayer
button = SKIP
repeat = 3
config = seek +600
end
# Seek backward 10 minutes
begin
prog = mplayer
button = REPLAY
repeat = 3
config = seek -600
end
# Toggle full-screen
begin
prog = mplayer
button = FULL
repeat = 3
config = vo_fullscreen
end
### Xine lirc setup
begin
prog = xine
button = PLAY
repeat = 3
config = Play
end
begin
prog = xine
button = STOP
repeat = 3
config = Stop
end
begin
prog = xine
button = OFF
repeat = 3
config = Quit
end
begin
prog = xine
button = PAUSE
repeat = 3
config = Pause
end
begin
prog = xine
button = UP
repeat = 3
config = EventUp
end
begin
prog = xine
button = DOWN
repeat = 3
config = EventDown
end
begin
prog = xine
button = LEFT
repeat = 3
config = EventLeft
end
begin
prog = xine
button = RIGHT
repeat = 3
config = EventRight
end
begin
prog = xine
button = OK
repeat = 3
config = EventSelect
end
begin
prog = xine
button = BACK/EXIT
repeat = 3
config = Menu
end
begin
prog = xine
button = >>
repeat = 3
#config = SpeedFaster
config = SeekRelative+60
end
begin
prog = xine
button = <<
repeat = 3
#config = SpeedSlower
config = SeekRelative-60
end
begin
prog = xine
button = VOL_UP
repeat = 3
config = Volume+
end
begin
prog = xine
button = VOL_DOWN
repeat = 3
config = Volume-
end
begin
prog = xine
button = MUTE
repeat = 3
config = Mute
end
begin
prog = xine
button = MENU
repeat = 3
config = RootMenu
end
begin
prog = xine
button = >>|
repeat = 3
config = EventNext
end
begin
prog = xine
button = |<<
repeat = 3
config = EventPrior
end
begin
prog = xine
button = GO
repeat = 3
config = OSDStreamInfos
end
begin
prog = xine
button = RED
repeat = 3
config = Quit
end
begin
button = GREEN
prog = xine
repeat = 3
config = SpuNext
end
begin
button = YELLOW
prog = xine
repeat = 3
config = SpuPrior
end
# increase brightness by 10
begin
button = 1
prog = xine
repeat = 3
config = BrightnessControl+
end
# decrease brightness by 10
begin
button = 4
prog = xine
repeat = 3
config = BrightnessControl-
end
pixie etc # cat /etc/conf.d/lircd
# Options to pass to the lircd process
LIRCD_OPTS="-d /dev/lirc/0 --logfile=/var/log/lircd.log"
pixie etc #
--
Nick Ellson
CCDA, CCNP, CCSP, CCAI,
MCSE 2000, Security+, Network+
Network Hobbyist, VFR Private Pilot.
On Wed, 4 Oct 2006, Nick wrote:
> On 04/10/06, Nick Ellson <grimm at nickellson.com> wrote:
>>
>> After completing a long needed update to my system, it would appear as
>> though *my* lircrc file is being ignored and some lean default is in use,
>> but I cannot find how to tell and i am really not looking forward to
>> running strace on mythfrontend....
>>
>> I run mythfrontend as user "pixie" and in /home/pixie/.lircrc I keep my
>> settings, and I symlink that to /etc/mythtv/.mythtv/lircrc and to
>> /home/pixie/.mythtv/lircrc just in case.
>>
>> I run lircd -v and get 0.8.0, man lircd says the -L <file> is how to get a
>> log file, but lircd claims not to have that option :\ I am running out of
>> options to track how to find the problem, neither mythfrontend/backend log
>> lirc messages it seems (greping through logs during start up to both)
>>
>> (my lircrc used to work.. like in live tv I had the channel up/down act to
>> switch tuner inputs, and Xine had fastforward set up)
>>
>> Ideas?
>
> Any chance your /etc/lircd.conf file has changed?
>
> Does irw still work?
>
> What options is lircd starting with?
>
> Was LIRC/ivtv updated and started using /dev/input instead of
> /dev/lirc (Hauppauge PVR cards)?
>
> Nick
>
> MythTV Official wiki:
> http://mythtv.org/wiki/
> MythTV users list archive:
> http://www.gossamer-threads.com/lists/mythtv/users
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
More information about the mythtv-users
mailing list