[mythtv-users] AverMedia A180 loading saa7134, need saa7134-dvb...

Chad masterclc at gmail.com
Fri Oct 13 23:44:54 UTC 2006


> Here is a trimmed version of my lsmod output, if that helps....
> I used grep to get rid of sound, nfs, and parport/gameport related stuff.

Thanks, it looks relatively similar to mine, nothing really stands out
as missing in mine compared to yours.

> Just comparing, where are your firmware modules???
> Did you download the firmware and put it in the appriopriate dir?
> Does it show up as being loaded in dmesg?

They are in /lib/firmware and get loaded the same as yours.

> I see this in my dmesg:
> nxt200x: NXT2004 Detected
> DVB: registering new adapter (saa7133[0]).
> DVB: registering frontend 0 (Nextwave NXT200X VSB/QAM frontend)...
> nxt2004: Waiting for firmware upload (dvb-fe-nxt2004.fw)...
> nxt2004: Waiting for firmware upload(2)...
> nxt2004: Firmware upload complete

Here's my dmesg output for that:

saa7130/34: v4l2 driver version 0.2.14 loaded
PCI: Enabling device 0000:00:0b.0 (0004 -> 0006)
PCI: setting IRQ 9 as level-triggered
PCI: Assigned IRQ 9 for device 0000:00:0b.0
saa7133[0]: found at 0000:00:0b.0, rev: 209, irq: 9, latency: 128,
mmio: 0xda800000
saa7133[0]: subsystem: 1461:1044, board: AVerMedia AVerTVHD MCE A180
[card=75,autodetected]
saa7133[0]: board init: gpio is 10400
saa7133[0]: i2c eeprom 00: 61 14 44 10 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7133[0]: i2c eeprom 10: 00 ff 86 0f ff 20 00 00 00 00 00 00 00 00 00 00
saa7133[0]: i2c eeprom 20: 01 40 01 02 02 ff 01 03 06 ff 01 11 00 00 00 00
saa7133[0]: i2c eeprom 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
saa7133[0]: i2c eeprom 40: ff 64 00 c2 14 16 ff ff 00 00 00 00 00 00 00 00
saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0
nxt200x: NXT2004 Detected
DVB: registering new adapter (saa7133[0]).
DVB: registering frontend 0 (Nextwave NXT200X VSB/QAM frontend)...

And then loading the firmware (by accessing the card using azap):
nxt2004: Waiting for firmware upload (dvb-fe-nxt2004.fw)...
nxt2004: Waiting for firmware upload(2)...
nxt2004: Firmware upload complete


> Mark

Thanks again for the responses so far.  If anyone has some other
ideas, I'd be happy to entertain anything.

Thanks!

-Chad


More information about the mythtv-users mailing list