[mythtv-users] IR Blaster and Channel change script for Myth TV

[Ramanraj Vamsi]

Hi Nick,

One more thing I still haven't found the code set for my HUMAX ND-1000C(?)
So,how can I make my change channel script work for my myth tv?

Thank you,

Raj.

On 9/9/06, Ramanraj Vamsi <ramanrajvamsi at gmail.com> wrote:
>
> Hi Nick,
> Yes, I did ran the send_power_new script  and it worked for me now.
> I just replaced my lircd.conf file with the one in that blog and started
> Lirc from yast>system >runlevel .
> I got blinking lights in the IR Blaster for each set.
>
>
>
> On 9/9/06, Nick <knowledgejunkie at gmail.com > wrote:
> >
> > On 08/09/06, Robin Gilks < g8ecj at gilks.org> wrote:
> >
> > > If you can't find a ready made file for the STB you can make one using
> > > irrecord if you have the original remote for the STB that you can
> > 'learn'
> > > from. Just follow the instructions for irrecord on the lirc.orgwebsite.
> >
> > One potential problem with using the PVR-150 IR receiver to do this is
> > the fact the Hauppauge cards may still be limited to the RC-5
> > signalling protocol (I'm not sure if the newer cards supporting the IR
> > blasters are any different.) If Raj's STB remote control uses some
> > other protocol, irrecord \may\ not be able to detect the signals. I'd
> > give it a try though, especially in raw more, just in case it works.
> >
> > Raj - have you run the IR blaster detection script from the blog -
> > this may speed things up in determining whether the IR blaster will be
> > able to control your STB.
> >
> > Nick
> >
> > --
> > MythTV Official wiki:
> >  http://mythtv.org/wiki/
> > MythTV users list archive:
> > http://www.gossamer-threads.com/lists/mythtv/users
> > _______________________________________________
> > mythtv-users mailing list
> > mythtv-users at mythtv.org
> > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> >
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mythtv.org/pipermail/mythtv-users/attachments/20060909/4ff31498/attachment.htm