[mythtv-users] Missing Recordings - 0.19 & 0.20
Bruce Nordstrand
brucen at ksl.com.au
Wed Sep 13 07:13:05 UTC 2006
I just installed a fresh copy of MythDora just to get up to speed
quickly. I have 3 tuner cards, all DVB. FC4 recognises them all, as does
Myth. However, when I try and record 3 programs at the same time,
everything is telling me it is happening but the file is missing...any
ideas? It doesn't matter what 3 programs. There is 232Gib of available
space for recordings.
Here are dmesg and mythbackend.log
mythbackend.log:
Starting up as the master server.
2006-09-13 16:55:43.477 New DB connection, total: 2
2006-09-13 16:55:43.479 Connected to database 'mythconverg' at host:
localhost
2006-09-13 16:55:43.487 DVB#0 Using DVB card 0, with frontend 'Zarlink
MT352 DVB-T'.
2006-09-13 16:55:43.492 New DB connection, total: 3
2006-09-13 16:55:43.494 Connected to database 'mythconverg' at host:
localhost
2006-09-13 16:55:43.545 DVB#1 Using DVB card 1, with frontend 'Philips
TDA10046H DVB-T'.
2006-09-13 16:55:44.729 DVB#2 Using DVB card 2, with frontend 'Philips
TDA10046H DVB-T'.
2006-09-13 16:55:45.147 New DB scheduler connection
2006-09-13 16:55:45.149 Connected to database 'mythconverg' at host:
localhost
2006-09-13 16:55:45.182 mythbackend version: 0.19.20060121-2 www.mythtv.org
2006-09-13 16:55:45.183 Enabled verbose msgs: important general
2006-09-13 16:55:45.185 AutoExpire: Found 3 recorders w/max rate of 416
MiB/min
2006-09-13 16:55:45.188 AutoExpire: Required Free Space: 4.3 GB w/freq:
5 min
2006-09-13 16:55:47.198 Reschedule requested for id -1.
2006-09-13 16:55:47.245 Scheduled 2 items in 0.0 = 0.02 match + 0.02 place
2006-09-13 16:55:47.255 Recording starts soon, AUTO-Startup assumed
2006-09-13 16:56:38.841 MainServer::HandleAnnounce Monitor
2006-09-13 16:56:38.847 adding: mythmaster.local.net as a client (events: 0)
2006-09-13 16:56:38.965 MainServer::HandleAnnounce Monitor
2006-09-13 16:56:38.967 adding: mythmaster.local.net as a client (events: 1)
2006-09-13 16:56:48.178 Reschedule requested for id 4.
2006-09-13 16:56:48.324 Scheduled 3 items in 0.1 = 0.07 match + 0.07 place
2006-09-13 16:56:50.021 Reschedule requested for id 5.
2006-09-13 16:56:50.187 Scheduled 4 items in 0.2 = 0.14 match + 0.02 place
2006-09-13 16:56:52.574 Reschedule requested for id 6.
2006-09-13 16:56:52.618 Scheduled 5 items in 0.0 = 0.02 match + 0.02 place
2006-09-13 17:00:02.517 TVRec(1): Changing from None to RecordingOnly
2006-09-13 17:00:02.604 Started recording: Australia Wide: channel 1502
on cardid 1, sourceid 1
2006-09-13 17:00:02.691 TVRec(2): Changing from None to RecordingOnly
2006-09-13 17:00:03.530 DVB#0 DVB SI Table Parser Started
2006-09-13 17:00:03.571 Started recording: M*A*S*H: channel 1506 on
cardid 2, sourceid 1
2006-09-13 17:00:03.640 TVRec(3): Changing from None to RecordingOnly
2006-09-13 17:00:03.771 Started recording: Ten News at Five: channel
1508 on cardid 3, sourceid 1
2006-09-13 17:00:05.667 DVB#2 DVB SI Table Parser Started
2006-09-13 17:03:04.083 MainServer::HandleAnnounce Monitor
2006-09-13 17:03:04.089 adding: mythmaster.local.net as a client (events: 0)
2006-09-13 17:03:08.636 MainServer::HandleAnnounce Monitor
2006-09-13 17:03:08.640 adding: mythmaster.local.net as a client (events: 0)
dmesg:
Linux video capture interface: v1.00
saa7130/34: v4l2 driver version 0.2.14 loaded
ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKB] -> GSI 11 (level,
low) -> IRQ 11
saa7133[0]: found at 0000:00:09.0, rev: 208, irq: 11, latency: 32, mmio:
0xe3100000
saa7133[0]: subsystem: 17de:7201, board: Tevion/KWorld DVB-T 220RF
[card=88,autodetected]
saa7133[0]: board init: gpio is 100
saa7133[0]: i2c eeprom 00: de 17 01 72 ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
tuner 0-004b: chip found @ 0x96 (saa7133[0])
tuner 0-004b: setting tuner address to 61
tuner 0-004b: type set to tda8290+75a
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0
saa7133[0]: registered device radio0
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LNKC] -> GSI 5 (level, low)
-> IRQ 5
saa7134[1]: found at 0000:00:0e.0, rev: 1, irq: 5, latency: 32, mmio:
0xe3102000
saa7134[1]: subsystem: 185b:c900, board: Compro Videomate DVB-T300
[card=70,autodetected]
saa7134[1]: board init: gpio is 843f00
input: saa7134 IR (Compro Videomate DV as /class/input/input1
tuner 1-0068: chip found @ 0xd0 (saa7134[1])
saa7134[1]: i2c eeprom 00: 5b 18 00 c9 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7134[1]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff
saa7134[1]: i2c eeprom 20: 01 40 01 03 03 ff 03 01 08 ff 00 87 ff ff ff ff
saa7134[1]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[1]: i2c eeprom 40: ff 02 00 c2 86 10 ff ff ff ff ff ff ff ff ff ff
saa7134[1]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff cb
saa7134[1]: i2c eeprom 60: 34 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[1]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
tuner 1-0068: tuner type not set
tuner 1-0068: tuner type not set
tda9887 1-0043: chip found @ 0x86 (saa7134[1])
saa7134[1]: registered device video1 [v4l2]
saa7134[1]: registered device vbi1
cx2388x v4l2 driver version 0.0.6 loaded
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 5 (level, low)
-> IRQ 5
CORE cx88[0]: subsystem: 1822:0025, board: digitalnow DNTV Live! DVB-T
Pro [card=42,autodetected]
TV tuner 63 at 0x1fe, Radio tuner -1 at 0x1fe
tuner 2-0061: chip found @ 0xc2 (cx88[0])
tuner 2-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
tda9887 2-0043: chip found @ 0x86 (cx88[0])
input: cx88 IR (digitalnow DNTV Live! as /class/input/input2
cx88[0]/0: found at 0000:00:0a.0, rev: 5, irq: 5, latency: 32, mmio:
0xde000000
cx88[0]/0: registered device video2 [v4l2]
cx88[0]/0: registered device vbi2
cx88[0]/0: registered device radio1
cx2388x blackbird driver version 0.0.6 loaded
cx2388x alsa driver version 0.0.6 loaded
ACPI: PCI Interrupt 0000:00:0a.1[A] -> Link [LNKC] -> GSI 5 (level, low)
-> IRQ 5
cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 7 (level, low)
-> IRQ 7
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 7, io base 0x0000d400
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:07.3[D] -> Link [LNKD] -> GSI 7 (level, low)
-> IRQ 7
uhci_hcd 0000:00:07.3: UHCI Host Controller
uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:07.3: irq 7, io base 0x0000d800
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 2-1: new low speed USB device using uhci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
input: Logitech USB Mouse as /class/input/input3
input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:07.3-1
usb 2-2: new full speed USB device using uhci_hcd and address 3
usb 2-2: configuration #1 chosen from 1 choice
lirc_dev: IR Remote Control driver registered, at major 61
lirc_mceusb2: USB remote driver for LIRC v0.22
lirc_mceusb2: Martin Blatter <martin_a_blatter at yahoo.com>
usb 2-2: reset full speed USB device using uhci_hcd and address 3
lirc_dev: lirc_register_plugin: sample_rate: 0
lirc_mceusb2[3]: Philips eHome Infrared Transceiver on usb2:3
usbcore: registered new driver lirc_mceusb2
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ibm_acpi: ec object not found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
EXT3 FS on hda2, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
JFS: nTxBlock = 3015, nTxLock = 24122
Adding 747012k swap on /dev/hda3. Priority:-1 extents:1 across:747012k
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
ACPI: PCI interrupt for device 0000:00:0a.0 disabled
cx2388x dvb driver version 0.0.6 loaded
ACPI: PCI Interrupt 0000:00:0a.2[A] -> Link [LNKC] -> GSI 5 (level, low)
-> IRQ 5
cx88[0]/2: found at 0000:00:0a.2, rev: 5, irq: 5, latency: 32, mmio:
0xe0000000
cx88[0]/2: cx2388x based dvb card
DVB: registering new adapter (cx88[0]).
DVB: registering frontend 0 (Zarlink MT352 DVB-T)...
saa7130/34: v4l2 driver version 0.2.14 loaded
ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKB] -> GSI 11 (level,
low) -> IRQ 11
saa7133[0]: found at 0000:00:09.0, rev: 208, irq: 11, latency: 32, mmio:
0xe3100000
saa7133[0]: subsystem: 17de:7201, board: Tevion/KWorld DVB-T 220RF
[card=88,autodetected]
saa7133[0]: board init: gpio is 100
cx2388x v4l2 driver version 0.0.6 loaded
cx88_blackbird: Unknown symbol cx88_do_ioctl
cx88_blackbird: Unknown symbol cx88_do_ioctl
cx88_blackbird: Unknown symbol cx88_do_ioctl
tuner 1-004b: chip found @ 0x96 (saa7133[0])
tuner 1-004b: setting tuner address to 61
tuner 1-004b: type set to tda8290+75a
saa7133[0]: i2c eeprom 00: de 17 01 72 ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0
saa7133[0]: registered device radio0
ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LNKC] -> GSI 5 (level, low)
-> IRQ 5
saa7134[1]: found at 0000:00:0e.0, rev: 1, irq: 5, latency: 32, mmio:
0xe3102000
saa7134[1]: subsystem: 185b:c900, board: Compro Videomate DVB-T300
[card=70,autodetected]
saa7134[1]: board init: gpio is 843f00
input: saa7134 IR (Compro Videomate DV as /class/input/input4
tuner 3-0061: chip found @ 0xc2 (saa7134[1])
tuner 3-0061: type set to 67 (Philips TD1316 Hybrid Tuner)
tuner 3-0068: chip found @ 0xd0 (saa7134[1])
tda9887 3-0043: chip found @ 0x86 (saa7134[1])
saa7134[1]: i2c eeprom 00: 0b 10 00 49 10 00 1c 00 03 00 09 0c 40 00 00 10
saa7134[1]: i2c eeprom 10: 00 28 82 01 50 20 ca 00 01 50 a2 ed a9 00 00 50
saa7134[1]: i2c eeprom 20: 01 40 00 00 02 26 01 00 00 79 00 04 ca 50 80 ed
saa7134[1]: i2c eeprom 30: ca 00 02 50 52 ed 9c 00 03 50 22 71 08 38 ca e7
saa7134[1]: i2c eeprom 40: 9c 00 00 c0 84 00 02 50 32 5e 02 20 01 24 9c e7
saa7134[1]: i2c eeprom 50: 02 00 01 ed 02 20 02 50 32 5e 19 20 01 3c 02 c3
saa7134[1]: i2c eeprom 60: 00 00 01 ed 81 00 08 50 12 26 81 e7 b2 00 01 ed
saa7134[1]: i2c eeprom 70: b2 20 02 50 32 5e 02 20 01 24 b2 ed c7 00 02 50
saa7134[1]: registered device video1 [v4l2]
saa7134[1]: registered device vbi1
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 5 (level, low)
-> IRQ 5
cx88[0]/0: found at 0000:00:0a.0, rev: 5, irq: 5, latency: 32, mmio:
0xde000000
cx88[0]/0: registered device video2 [v4l2]
cx88[0]/0: registered device vbi2
cx88[0]/0: registered device radio1
cx2388x blackbird driver version 0.0.6 loaded
DVB: registering new adapter (saa7133[0]).
DVB: registering frontend 1 (Philips TDA10046H DVB-T)...
DVB: registering new adapter (saa7134[1]).
DVB: registering frontend 2 (Philips TDA10046H DVB-T)...
saa7134 ALSA driver for DMA sound loaded
saa7133[0]/alsa: saa7133[0] at 0xe3100000 irq 11 registered as card -1
saa7134[1]/alsa: saa7134[1] at 0xe3102000 irq 5 registered as card -1
b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded
successfully
usbcore: registered new driver cinergyT2
saa7146: register extension 'budget dvb'.
saa7146: register extension 'dvb'.
bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bt878: AUDIO driver version 0.0.0 loaded
saa7146: register extension 'budget_av'.
saa7146: register extension 'budget_ci dvb'.
em28xx v4l2 driver version 0.0.1 loaded
usbcore: registered new driver em28xx
ACPI: PCI interrupt for device 0000:00:0a.0 disabled
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10 (level,
low) -> IRQ 10
NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8762 Mon May 15
13:06:38 PDT 2006
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
tda1004x: setting up plls for 48MHz sampling clock
tda1004x: found firmware revision 23 -- ok
tda1004x: setting up plls for 48MHz sampling clock
tda1004x: found firmware revision 23 -- ok
tda1004x: setting up plls for 48MHz sampling clock
tda1004x: found firmware revision 23 -- ok
tda1004x: setting up plls for 48MHz sampling clock
tda1004x: found firmware revision 23 -- ok
tda1004x: setting up plls for 48MHz sampling clock
tda1004x: setting up plls for 48MHz sampling clock
tda1004x: found firmware revision 23 -- ok
tda1004x: found firmware revision 23 -- ok
tda1004x: setting up plls for 48MHz sampling clock
tda1004x: found firmware revision 23 -- ok
tda1004x: setting up plls for 48MHz sampling clock
tda1004x: found firmware revision 23 -- ok
tda1004x: setting up plls for 48MHz sampling clock
tda1004x: found firmware revision 23 -- ok
tda1004x: setting up plls for 48MHz sampling clock
tda1004x: setting up plls for 48MHz sampling clock
tda1004x: found firmware revision 23 -- ok
tda1004x: found firmware revision 23 -- ok
tda1004x: setting up plls for 48MHz sampling clock
tda1004x: found firmware revision 23 -- ok
tda1004x: setting up plls for 48MHz sampling clock
tda1004x: setting up plls for 48MHz sampling clock
tda1004x: found firmware revision 23 -- ok
tda1004x: found firmware revision 23 -- ok
tda1004x: setting up plls for 48MHz sampling clock
tda1004x: setting up plls for 48MHz sampling clock
tda1004x: found firmware revision 23 -- ok
tda1004x: found firmware revision 23 -- ok
tda1004x: setting up plls for 48MHz sampling clock
tda1004x: found firmware revision 23 -- ok
tda1004x: setting up plls for 48MHz sampling clock
tda1004x: found firmware revision 23 -- ok
tda1004x: setting up plls for 48MHz sampling clock
tda1004x: setting up plls for 48MHz sampling clock
tda1004x: found firmware revision 23 -- ok
tda1004x: found firmware revision 23 -- ok
=======================
Cheers
Bruce
More information about the mythtv-users
mailing list