[mythtv-users] 0.20 fails to set/change channels with ivtv and pvr250

[Kai Militzer]

Hello everyone,

since upgrading to 0.20 mythtv fails to set and/or change the channels. 
It always stays at the last working/tuned channel. Rolling back to 0.19 
makes it work again. I use ivtv 0.4.6 with a PVR250 card. Do I need to 
upgrade to a newer ivtv version?

In my log (with the 0.20 version) I see messages like that:

2006-09-15 18:42:49.429 Channel(/dev/video): InitPictureAttribute(       
hue):
                        [ -128,  127] dflt(    0, 0.50, 128)
2006-09-15 18:42:49.430 Channel(/dev/video)::TuneTo(E5): 
curList[6].freq(175250)2006-09-15 18:42:49.431 
Channel(/dev/video)::Tune(175250000, , analog)
2006-09-15 18:42:49.432 Channel(/dev/video)::SwitchToInput(in 2, '')
2006-09-15 18:42:49.433 Channel(/dev/video): SetInputAndFormat() failed
2006-09-15 18:42:49.434 TVRec(1) Error: Setting start channel '12' failed,
                        and backup '1' failed as well.

Any ideas what went wrong?

Any help is appreciated.

Regards,
Kai