[mythtv-users] 0.20 fails to set/change channels with ivtv and pvr250
Michael T. Dean
mtdean at thirdcontact.com
Fri Sep 15 20:04:30 UTC 2006
On 09/15/06 12:58, Kai Militzer wrote:
>since upgrading to 0.20 mythtv fails to set and/or change the channels.
>It always stays at the last working/tuned channel. Rolling back to 0.19
>makes it work again. I use ivtv 0.4.6 with a PVR250 card. Do I need to
>upgrade to a newer ivtv version?
>
>
I use 0.2.0-rc3j and it works fine, so I doubt you need a newer IvyTV.
>In my log (with the 0.20 version) I see messages like that:
>
>2006-09-15 18:42:49.429 Channel(/dev/video): InitPictureAttribute(
>hue):
> [ -128, 127] dflt( 0, 0.50, 128)
>2006-09-15 18:42:49.430 Channel(/dev/video)::TuneTo(E5):
>curList[6].freq(175250)2006-09-15 18:42:49.431
>Channel(/dev/video)::Tune(175250000, , analog)
>2006-09-15 18:42:49.432 Channel(/dev/video)::SwitchToInput(in 2, '')
>2006-09-15 18:42:49.433 Channel(/dev/video): SetInputAndFormat() failed
>2006-09-15 18:42:49.434 TVRec(1) Error: Setting start channel '12' failed,
> and backup '1' failed as well.
>
>Any ideas what went wrong?
>
Sounds like someone has an invalid channel change script specified, but
is using the tuner input. So, when the channel change script fails, the
LiveTV fails.
But, I don't know for sure because I need to know what input you're
using, what type of source (i.e. RF modulated feed from a STB,
S-Video/Composite from a STB, direct antenna/cable connection, etc.),
whether you actually have a channel 12, and, perhaps, a few more
things... :)
Mike
More information about the mythtv-users
mailing list