[mythtv-users] MythDVD transcode deletes my files
Bonkey Dcow
bonkeydcow at gmail.com
Tue Sep 19 20:24:04 UTC 2006
Oops ignore that last error section, it was a typo on the print_status
option. here is the real output...
transcode -i /video/dvdtemp/Lexx/vob/ -g 720x480 -f 0,1 -M 2 -V -X 2,0 -y
xvid -o /video/Movies/dvd/Lexx.avi --print_status 20 --color 0 -R 2,
twopass.log
*** WARNING: The option -V is deprecated. ***
*** Transcode internal frame handling is now in YV12 / YUV420 ***
*** format by default because most codecs can only handle this format, ***
*** otherwise leading to unnecessary time and quality wasting conversions.
***
*** If you want to have to "old" behaviour (RGB24 as internal format), ***
*** then please use the new -1/--use_rgb option ***
transcode v1.0.2 (C) 2001-2003 Thomas Oestreich, 2003-2004 T. Bitterberg
[transcode] (probe) suggested AV correction -D 1 (41 ms) | AV 66 ms | 25 ms
[transcode] auto-probing source /video/dvdtemp/Lexx/vob/ (ok)
[transcode] V: import format | MPEG-2 (V=vob|A=vob)
[transcode] V: AV demux/sync | (2) initial MPEG sequence / enforce frame
rate
[transcode] V: import frame | 720x480 1.50:1 encoded @ 4:3
[transcode] V: new aspect ratio | 720x544 1.32:1 (-X)
[transcode] V: bits/pixel | 0.192
[transcode] V: decoding fps,frc | 23.976,1
[transcode] V: multi-pass | (mode=2) reading data (pass2) from
twopass.log
[transcode] V: Y'CbCr | YV12/I420
[transcode] A: import format | 0x2000 AC3 [48000,16,2] 224
kbps
[transcode] A: export format | 0x55 MPEG layer-3 [48000,16,2] 128
kbps
[transcode] V: encoding fps,frc | 23.976,1
[transcode] A: bytes per frame | 8008 (8008.000000)
[transcode] A: adjustment | 0 at 1000
[transcode] V: IA32/AMD64 accel | sse3 (sse3 sse2 sse 3dnowext 3dnow mmxext
mmx asm C)
tc_memcpy: using sse for memcpy
[transcode] V: video buffer | 10 @ 720x544
[import_vob.so] v0.6.0 (2003-10-02) (video) MPEG-2 | (audio) MPEG/AC3/PCM |
(subtitle)
[export_xvid4.so] v0.0.5 (2003-12-05) (video) XviD 1.0.x series (aka API 4.0)
| (audio) MPEG/AC3/PCM
[import_vob.so] tccat -i "/video/dvdtemp/Lexx/vob/" -t vob -d 0 -S 0 |
tcdemux -a 0 -x ac3 -S 0 -M 2 -d 0 | tcextract -t vob -a 0 -x ac3 -d 0 |
tcdecode -x ac3 -d 0 -s 1.000000,1.000000,1.000000 -A 0
[import_vob.so] tccat -i "/video/dvdtemp/Lexx/vob/" -t vob -d 0 -S 0 |
tcdemux -s 0x80 -x mpeg2 -S 0 -M 2 -f 23.976024 -P /tmp/filekF6CS7 -d 0 |
tcextract -t vob -a 0 -x mpeg2 -d 0 | tcdecode -x mpeg2 -d 0 -y yv12
error: this version of transcode supports only
directories containing files of identical file type.
Please clean up directory /video/dvdtemp/Lexx/vob/ and restart.
file /video/dvdtemp/Lexx/vob/twopass.log with filetype unknown file type is
invalid for directory mode.
tc_memcpy: using sse for memcpy
tc_memcpy: using sse for memcpy
error: this version of transcode supports only
directories containing files of identical file type.
Please clean up directory /video/dvdtemp/Lexx/vob/ and restart.
file /video/dvdtemp/Lexx/vob/twopass.log with filetype unknown file type is
invalid for directory mode.
[decode_mpeg2.c] libmpeg2 0.4.0b loop decoder
[decode_mpeg2.c] libmpeg2 acceleration: 3dnow
[export_xvid4.so] Neither './xvid4.cfg' nor '~/.transcode/xvid4.cfg'
[export_xvid4.so] found. Default settings will be used instead.
Audio: using new version
Audio: using lame-3.96.1
On 9/19/06, Bonkey Dcow <bonkeydcow at gmail.com> wrote:
>
> transcode -i /video/dvdtemp/Lexx/vob/ -g 720x480 -f 0,1 -M 2 -V -X 2,0 -y
> xvid,null -o /dev/null --print_status 20 --color 0 -R 1,twopass.log
> *** WARNING: The option -V is deprecated. ***
> *** Transcode internal frame handling is now in YV12 / YUV420 ***
> *** format by default because most codecs can only handle this format, ***
> *** otherwise leading to unnecessary time and quality wasting conversions.
> ***
> *** If you want to have to "old" behaviour (RGB24 as internal format), ***
> *** then please use the new -1/--use_rgb option ***
> transcode v1.0.2 (C) 2001-2003 Thomas Oestreich, 2003-2004 T. Bitterberg
> [transcode] (probe) suggested AV correction -D 1 (41 ms) | AV 66 ms | 25
> ms
> [transcode] auto-probing source /video/dvdtemp/Lexx/vob/ (ok)
> [transcode] V: import format | MPEG-2 (V=vob|A=vob)
> [transcode] V: AV demux/sync | (2) initial MPEG sequence / enforce
> frame rate
> [transcode] V: import frame | 720x480 1.50:1 encoded @ 4:3
> [transcode] V: new aspect ratio | 720x544 1.32:1 (-X)
> [transcode] V: bits/pixel | 0.192
> [transcode] V: decoding fps,frc | 23.976,1
> [transcode] V: multi-pass | (mode=1) writing data (pass 1) to
> twopass.log
> [transcode] V: Y'CbCr | YV12/I420
> [transcode] A: import format | 0x2000 AC3 [48000,16,2] 224
> kbps
> [transcode] A: export | disabled
> [transcode] V: encoding fps,frc | 23.976,1
> [transcode] A: bytes per frame | 8008 (8008.000000)
> [transcode] A: adjustment | 0 at 1000
> [transcode] V: IA32/AMD64 accel | sse3 (sse3 sse2 sse 3dnowext 3dnow
> mmxext mmx asm C)
> tc_memcpy: using sse for memcpy
> [transcode] V: video buffer | 10 @ 720x544
> [import_vob.so] v0.6.0 (2003-10-02) (video) MPEG-2 | (audio) MPEG/AC3/PCM
> | (subtitle)
> [export_null.so] v0.1.2 (2001-08-17) (video) null | (audio) null
> [export_xvid4.so] v0.0.5 (2003-12-05) (video) XviD 1.0.x series (aka API
> 4.0) | (audio) MPEG/AC3/PCM
> [import_vob.so] tccat -i "/video/dvdtemp/Lexx/vob/" -t vob -d 0 -S 0 |
> tcdemux -a 0 -x ac3 -S 0 -M 2 -d 0 | tcextract -t vob -a 0 -x ac3 -d 0 |
> tcdecode -x ac3 -d 0 -s 1.000000,1.000000,1.000000 -A 0
> [import_vob.so] tccat -i "/video/dvdtemp/Lexx/vob/" -t vob -d 0 -S 0 |
> tcdemux -s 0x80 -x mpeg2 -S 0 -M 2 -f 23.976024 -P /tmp/fileTSpJfR -d 0
> | tcextract -t vob -a 0 -x mpeg2 -d 0 | tcdecode -x mpeg2 -d 0 -y yv12
> tc_memcpy: using sse for memcpy
> tc_memcpy: using sse for memcpy
> [decode_mpeg2.c] libmpeg2 0.4.0b loop decoder
> [decode_mpeg2.c] libmpeg2 acceleration: 3dnow
> [export_xvid4.so] Neither './xvid4.cfg' nor '~/.transcode/xvid4.cfg'
> [export_xvid4.so] found. Default settings will be used instead.
> [encoder.c] Delaying audio (0)
> encoding frames [000000-068860], 38.53 fps, EMT: 0:47:52, ( 0| 0| 9)
> clean up | frame threads | unload modules | cancel signal | internal
> threads | done
> [transcode] encoded 68871 frames (17214 dropped, 0 cloned), clip length
> 2872.49 s
> _____________________________________
> That is the part that works.
>
> Below is the broken part.
> _____________________________________
>
>
> transcode -i /video/dvdtemp/Lexx/vob/ -g 720x480 -f 0,1 -M 2 -V -X 2,0 -y
> xvid -o /video/Movies/dvd/Lexx.avi -- print_status 20 --color 0 -R 2,
> twopass.log
> *** WARNING: The option -V is deprecated. ***
> *** Transcode internal frame handling is now in YV12 / YUV420 ***
> *** format by default because most codecs can only handle this format, ***
> *** otherwise leading to unnecessary time and quality wasting conversions.
> ***
> *** If you want to have to "old" behaviour (RGB24 as internal format), ***
> *** then please use the new -1/--use_rgb option ***
> transcode v1.0.2 (C) 2001-2003 Thomas Oestreich, 2003-2004 T. Bitterberg
> [transcode] warning : unused command line parameter detected (17/23)
> [transcode] warning : argc[17]=print_status (unused)
> [transcode] warning : argc[18]=20 (unused)
> [transcode] warning : argc[19]=--color (unused)
> [transcode] warning : argc[20]=0 (unused)
> [transcode] warning : argc[21]=-R (unused)
> [transcode] warning : argc[22]=2,twopass.log (unused)
> [transcode] (probe) suggested AV correction -D 1 (41 ms) | AV 66 ms | 25
> ms
> [transcode] auto-probing source /video/dvdtemp/Lexx/vob/ (ok)
> [transcode] V: import format | MPEG-2 (V=vob|A=vob)
> [transcode] V: AV demux/sync | (2) initial MPEG sequence / enforce
> frame rate
> [transcode] V: import frame | 720x480 1.50:1 encoded @ 4:3
> [transcode] V: new aspect ratio | 720x544 1.32:1 (-X)
> [transcode] V: bits/pixel | 0.192
> [transcode] V: decoding fps,frc | 23.976,1
> [transcode] V: Y'CbCr | YV12/I420
> [transcode] A: import format | 0x2000 AC3 [48000,16,2] 224
> kbps
> [transcode] A: export format | 0x55 MPEG layer-3 [48000,16,2] 128
> kbps
> [transcode] V: encoding fps,frc | 23.976,1
> [transcode] A: bytes per frame | 8008 (8008.000000)
> [transcode] A: adjustment | 0 at 1000
> [transcode] V: IA32/AMD64 accel | sse3 (sse3 sse2 sse 3dnowext 3dnow
> mmxext mmx asm C)
> tc_memcpy: using sse for memcpy
> [transcode] V: video buffer | 10 @ 720x544
> [import_vob.so] v0.6.0 (2003-10-02) (video) MPEG-2 | (audio) MPEG/AC3/PCM
> | (subtitle)
> [export_xvid4.so] v0.0.5 (2003-12-05) (video) XviD 1.0.x series (aka API
> 4.0) | (audio) MPEG/AC3/PCM
> [import_vob.so] tccat -i "/video/dvdtemp/Lexx/vob/" -t vob -d 0 -S 0 |
> tcdemux -a 0 -x ac3 -S 0 -M 2 -d 0 | tcextract -t vob -a 0 -x ac3 -d 0 |
> tcdecode -x ac3 -d 0 -s 1.000000,1.000000,1.000000 -A 0
> [import_vob.so] tccat -i "/video/dvdtemp/Lexx/vob/" -t vob -d 0 -S 0 |
> tcdemux -s 0x80 -x mpeg2 -S 0 -M 2 -f 23.976024 -P /tmp/filebYjc3Z -d 0
> | tcextract -t vob -a 0 -x mpeg2 -d 0 | tcdecode -x mpeg2 -d 0 -y yv12
> tc_memcpy: using sse for memcpy
> tc_memcpy: using sse for memcpy
>
>
> error: this version of transcode supports only
> directories containing files of identical file type.
> Please clean up directory /video/dvdtemp/Lexx/vob/ and restart.
> file /video/dvdtemp/Lexx/vob/twopass.log with filetype unknown file type
> is invalid for directory mode.
>
>
> error: this version of transcode supports only
> directories containing files of identical file type.
> Please clean up directory /video/dvdtemp/Lexx/vob/ and restart.
> file /video/dvdtemp/Lexx/vob/twopass.log with filetype unknown file type
> is invalid for directory mode.
> [export_xvid4.so] Neither './xvid4.cfg' nor '~/.transcode/xvid4.cfg'
> [export_xvid4.so] found. Default settings will be used instead.
> Audio: using new version
> Audio: using lame-3.96.1
> [decode_mpeg2.c] libmpeg2 0.4.0b loop decoder
> [decode_mpeg2.c] libmpeg2 acceleration: 3dnow
>
>
> On 9/19/06, Anduin Withers <awithers at anduin.com> wrote:
>
> > > 12:56:32: launching job: job dvd 61 1 6 0 -1 /video/Movies/dvd/Lexx
> > > 12:56:33: transcode command will be: transcode -i
> > /video/dvdtemp/Lexx/vob/
> >
> > > -g 720x480 -f 0,1 -M 2 -V -X 2,0 -y xvid,null -o /dev/null
> > --print_status
> > > 20 --color 0 -R 1,twopass.log
> > > 12:56:33: job thread beginning to rip dvd title
> > > 13:01:04: job thread finished ripping dvd title
> > > 13:29:06: transcode command will be: transcode -i
> > /video/dvdtemp/Lexx/vob/
> > > -g 720x480 -f 0,1 -M 2 -V -X 2,0 -y xvid -o
> > /video/Movies/dvd/Lexx.avi --
> > > print_status 20 --color 0 -R 2,twopass.log
> > > 13:29:10: job finished successfully: job dvd 61 1 6 0 -1
> > > /video/Movies/dvd/Lexx
> >
> > Any chance you can take a test vob and manually run those transcode
> > commands
> > and share the results?
> >
> > The log doesn't have enough info, other than to see that the second pass
> > unfortunately took longer than 0 seconds but was too short to actually
> > have
> > done anything.
> >
> > --
> > Anduin Withers
> >
> > _______________________________________________
> > mythtv-users mailing list
> > mythtv-users at mythtv.org
> > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> >
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mythtv.org/pipermail/mythtv-users/attachments/20060919/3894e401/attachment-0001.htm
More information about the mythtv-users
mailing list