[mythtv-users] Temperature on status screen

[stanley kamithi]

code it.

 it was  done only for the mythbackend, so shows up on mythweb.

On 9/22/06, Phill Edwards <philledwards at gmail.com> wrote:
>
> > It sounds like Axel's RPMs don't have this, as lm_sensors is also
> > working on my box, but I see nothing on the status screen, either.
> >
> > The existence of lm_sensors seems one of the more odd things to check
> > for on the build system. That should be a run-time check.
>
> Axel has updated the RPMs now but I'm still not seeing anything on the
> status screen. Here's a screenshot -
> http://www.oaklands.aust.com/mythtv/system_status.png
>
> And here's the putput when I run sensors at the command prompt (to
> show that I have configured lm_sensors):
>
> $ sensors
> it8712-isa-0290
> Adapter: ISA adapter
> VCore 1:   +1.38 V  (min =  +1.42 V, max =  +1.57 V)   ALARM
> VCore 2:   +2.54 V  (min =  +2.40 V, max =  +2.61 V)
> +3.3V:     +3.28 V  (min =  +3.14 V, max =  +3.47 V)
> +5V:       +4.19 V  (min =  +4.76 V, max =  +5.24 V)   ALARM
> +12V:     +11.84 V  (min = +11.39 V, max = +12.61 V)
> -12V:     -16.07 V  (min = -12.63 V, max = -11.41 V)   ALARM
> -5V:       -8.17 V  (min =  -5.26 V, max =  -4.77 V)   ALARM
> Stdby:     +2.98 V  (min =  +4.76 V, max =  +5.24 V)   ALARM
> VBat:      +4.08 V
> Case Fan: 1163 RPM  (min = 3013 RPM, div = 8)          ALARM
> M/B Temp:    +25°C  (low  =   +15°C, high =   +40°C)   sensor =
> thermistor
> CPU Temp:    +25°C  (low  =   +15°C, high =   +45°C)   sensor =
> thermistor
> CPU Temp:    +41°C  (low  =   +15°C, high =   +45°C)   sensor = diode
>
> Any ideas how to get it to show up in the status screen?
>
> Regards,
> Phill
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mythtv.org/pipermail/mythtv-users/attachments/20060922/56541026/attachment.htm