[mythtv-users] Upgrade from 0.18.1 to 0.20: frequency out of range

[Wilhelm Meier]

Am Samstag, 23. September 2006 09:02 schrieb roger:
> See this thread if you are using a MPEG2 device
> "[mythtv-users]  Need MPEG recorder, but compiled without MPEG
> support! (gentoo 0.20_p11244)"

Thanks, but what about the frequency warning aout of range in the log?
Was there a change in the database from 0.18 to 0.20?

>
> On Sat, 2006-09-23 at 08:38 +0200, Wilhelm Meier wrote:
> > Hi,
> >
> > after upgrading from 0.18.1 to 0.20 on gentoo media-tv/mythtv-0.20_p11244
> > I got the following in mythbackendlog when I try to watch live tv:
> >
> > 2006-09-22 23:13:56.384 TVRec(8): Changing from None to WatchingLiveTV
> > 2006-09-22 23:13:56.388 TVRec(8): HW Tuner: 8->8
> > 2006-09-22 23:13:56.393 DVBChan(0) Warning: Your frequency setting
> > (12480000) is out of range. (min/max:950000/2150000)
> > 2006-09-22 23:13:56.395 DiSEqCDevTree, Error: No root device tree node!
> > 2006-09-22 23:13:56.399 DVBChan(0) Error: Tune(): Failed to setup DiSEqC
> > devices
> > 2006-09-22 23:13:56.403 DVBChan(0) Error: SetChannelByString(28): Tuning
> > to frequency.
> > 2006-09-22 23:13:56.407 TVRec(8) Error: Failed to set channel to 28.
> >
> > Got blank screen.
> >
> > Any Ideas?
>
> --
> Roger
> http://www.eskimo.com/~roger/index.html
> Key fingerprint = 8977 A252 2623 F567 70CD 1261 640F C963 1005 1D61
>
> Sat Sep 23 00:02:30 PDT 2006

-- 
Wilhelm Meier
email: wilhelm.meier at fh-kl.de