[mythtv-users] DirecTV D10-300 Serial Interface
blaine.m.nelson at gmail.com
Mon Aug 27 23:00:00 UTC 2007
I've got an ohm-meter. Any tips on how exactly to use it to check if
the cable is bad? I've only used it for troubleshooting a busted
washing machine, so I've got no idea what to do for this cable.
On 8/26/07, George Mari <george_mythusers at mari1938.org> wrote:
> Blaine Nelson wrote:
> > I believe the default in the perl script is 9600 baud. I've never
> > done anything in perl, but here's the line I think does that:
> > $baudrate = "9600";
> > Just to be sure, I ran directv.pl from the command line using the
> > baudrate parameter set to 9600 (I also tried 115200 and 57600).
> > Again, I tried for both ttyS0 and ttyS1 and for both serial outs on
> > the machine.
> > Perhaps the order of the parameters is screwy? Here's what I got for
> > the 9600 baudrate attempts:
> >>> You've got a D10-100. Mine's a D10-300. Maybe the software upgrade
> >>> for the D10-300 that's supposed to make it behave like a D10-100
> >>> doesn't do the trick any more? Like directv has put out a newer
> >>> version that sucks?
> This is a possibility, but I've not heard of problems with the D10-300.
> The Wiki page at:
> seems to indicate it should work. (There are also many useful links on
> that page, BTW)
> >>> The cable? Could it be bad?
> Well, we know the D10-300 works because other people have reported it as
> The way I see it, there are three things that could be causing your failure:
> 1. Bad serial port. To eliminate this possibility, hook up a modem or
> other serial device to your port to make sure the port itself works.
> 2. Bad cable. I have found bad connections in my home-made cable using
> an ohm-meter. If you already have a meter, I suggest checking the cable
> this way. If not, another possibility is buy another cable, preferably
> from a different source. Of course, you could get two bad cables, but
> what's the likelihood of that happening?
> 3. The D10-300 has a bad port. The way to rule out or verify this is to
> get another D10-300 and try that. (Hey, nobody every said logic was
> mythtv-users mailing list
> mythtv-users at mythtv.org
More information about the mythtv-users