[mythtv-users] mythtv hardware plans
adeffs.mythtv at gmail.com
Sat Feb 3 17:38:41 UTC 2007
On 2/3/07, Brian Wood <beww at beww.org> wrote:
> On Feb 3, 2007, at 9:32 AM, jason maxwell wrote:
> > So I'd like to get some input.
> > I'm working on gathering the hardware to build myself one myth box to
> > rule them all. I want to do this right, but cant totally break the
> > bank doing it. I'll tell you what the plan is, let me know what you
> > think.
> > I will have a Comcast coax directly to the mythtv box, no set top box
> > at all. I would like to have the option of watching and time shifting
> > live or recorded HD content, while also recording other possibly HD
> > content simultaneously.
> > Here's what I have in mind so far:
> > - non-VIA chipset ATX mobo
> > how fast will my proc need to be to do what i want?
> As fast as you can afford :-)
adding to Brian's always good advice...
> You didn't mention what CPU architecture you're thinking of but there
> are some really good deals on the socket 939 AMD chips these days.
> You can get an FX60 for under $400 and an Opteron 165 for $100. This
> assumes you're in the USA, your reference to Comcast would indicate
Look into the mATX boards with built in GeForce 6100/6150 cards. There
are a few with DVI output for your HDTV. They will also have SPDIF
output on the back plate or with header pins that you can get an
adapter for ($15). This is a nice all in one solution that can be
easily turned into a standalone frontend later if you decide to go in
You'll want a minimum of an Athlon x2 for a combined system.
> > - (2) pcHDTV-5500 capture cards
> Might consider the HD Homerun unit, cheaper for 2 HD tuners.
Agreed, and throw in a PVR-500 or PVR-150 for standard def channels.
> > - SATA ~400GB+ hard drive
> > I will likely add more storage down the road at some point. I tend
> > to be a hoarder :)
> If that's your only drive make sure your mobo can boot from SATA. I'd
> consider a small (20-40GB) drive for the OS (I can't believe I just
> referred to a 40GB drive as "small").
I agree on the separate OS drive, it makes it much easier to upgrade
your capacity later. Without a major overhaul.
> > - NVidia Geforce4 4200Ti AGP graphics
> > If mobo has AGP. If not, I dont mind springing for a new PCIX card,
> > but cheaper is always better if this card could work.
> If you get a 939 AGP board a 5200 card is cheap and known to work
> great with Myth.
Get at least a 5200, especially since your going HDTV, if you don't go
with a built in video card. There is some work in SVN on doing
rendering, etc off board on the graphics card, so if you find a cheap
fanless 6800 or 7xxx series nvidia card that may be a good upgrade
choice as the faster the better for this method.
Oh yea, definitely fanless!
> > - (2) 256MB DDR2 RAM
> > That should be plenty, right?
> Again architecture dependent. The 939 chips need DDR1. I'd go with a
> total of 1GB though, my SD system often has 900 MB in use, but some
> of that is cache of course.
agreed, go with at least 1GB for a combo setup.
> > Is there anything important that I'm overlooking? Other suggestions?
> > Thanks in advance for all responses.
> You are overlooking a good UPS, unless you just didn't mention it.
> The APC units have good Linux support.
can not agree more with this. Even a "cheap" UPS is a good idea,
though I'd recommend purchasing a Smart-UPS and plug this and your
HDTV into. The Smart UPS have voltage regulation circuitry which DLP's
*love* and actually helps extend bulb life and obviously protects from
outages (lets you turn the tv off and have the fan still able to cool
You didn't mention a case, but if you search the list, there have been
many threads about both your initial question and nice home theater pc
Before you ask, read the FAQ!
then search the Wiki, and this list,
Mailinglist etiquette -
More information about the mythtv-users