[mythtv-users] ATSC-110 - Cannot load saa1734-dvb

Jake Thompson jake at jakethompson.com
Wed Jan 10 19:27:48 UTC 2007


I am using it as a digital tuner only, so I do not need a loopback cble.  If
you plan on using it for the NTSC tuner(not really the best for this) then
you would need to load saa7134-alsa to get the sound with the video stream,
still should not need the loopback cable for this.

I have a PVR-150 with a working remote, so I have not tried to get the
remote on the ATSC-110 to work, if anyone has done this please let us know.

-Jake

On 1/10/07, Praveen Shenoy <mythuser at comcast.net> wrote:
>
> Thanks guysI will try this tonight. Since you have an atsc-110, do you
> have the remote working with myth? Also, the wiki also mentioned about
> loading saa7134-alsa. Is that something you are doing too? Are you using the
> loopback to feed the audio from the 110 to the line in on your sound card or
> is that not required if I did the v4lctl commands mentioned on the wiki?
>
> Praveen
>
> On Jan 9, 2007, at 7:10 PM, Jake Thompson wrote:
>
> I also have an ATSC-110 on FC6, works perfectly.
>
>
> Just to start testing you can do:
> modprobe saa7134-dvb
>
> This should load without a problem, make sure you have downloaded the
> firmware and put it in the correct place.
>
> You can take a look at dmesg to see if it loaded.
>
> Next, to make it load on every startup you can add
>
> alias char-major-212 saa7134-dvb
>
> to the modprobe.conf file and in /etc/sysconfig/modules
> create a file called dvb.modules with:
> #!/bin/sh
>
> for i in char-major-212; do
>         modprobe $i > /dev/null
> done
>
>
> chmod +x the file, reboot and you should be all set.
>
> -Jake
>
>
>
>
> On 1/9/07, Myth User <mythuser at comcast.net> wrote:
> >
> > Hello all
> > I am trying to setup atsc-110 to use QAM to record HD programs. I
> > have followed a bunch of documentation on getting this to work. I am
> > able to modprobe the saa1734-dvd module at the command line. As I am
> > not very familiar with the modprobe.conf entries (I tried and I am
> > having a kernel panic), it would be of great help if people using the
> > atsc-110 could post their modprobe entires. I have tried a few things
> > but, the dvb module does not load with the changes I have made. I
> > obviously don't understand the format and how the modprobe.conf
> > works:-(. My last change resulted in a kernel panic.
> >
> > The doc on the wiki
> >
> > http://www.mythtv.org/wiki/index.php/Kworld_ATSC_110
> >
> > says,
> >
> > Edit your /etc/modules file and insert an 'saa7134-dvb' right after
> > the saa7134 entry that should already exist in the file. This will
> > cause the module to load during boot.
> >
> > But, I don't see any entries for a saa7134 in the modprobe.conf and
> > dmesg seems to be loading it fine and I have been successful in
> > playing back HD using mplayer dvb:// after following the setup
> > process. But I don't know what the change to the modprobe.conf should
> > be to load the saa7134-dvd and not the saa7134. Should I be loading
> > both or should I load only the saa7134-dvb? I have spent a couple
> > weeks trying to get this to work. Can somebody who is using the
> > atsc-110 post their modprobe,conf?
> >
> > I am running Fedora Core 6 and the latest kernel installed using yum
> >
> > Thanks
> > Praveen
> > _______________________________________________
> > mythtv-users mailing list
> > mythtv-users at mythtv.org
> > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> >
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
>
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mythtv.org/pipermail/mythtv-users/attachments/20070110/28b1d8b1/attachment.htm 


More information about the mythtv-users mailing list