[mythtv-users] MythTV sound through SPDIF

Ludmil Miltchev ludmilmm at gmail.com
Mon Jun 4 18:59:58 UTC 2007


Eric Smith wrote:

> Ludmil,
> There should be a seperate setting for MythMusic which you can also 
> set to ALSA:iec958 I believe.
>
> On 6/4/07, *Ludmil Miltchev* < ludmilmm at gmail.com 
> <mailto:ludmilmm at gmail.com>> wrote:
>
>     Eric Smith wrote:
>
>     > On 6/4/07, *Ludmil Miltchev* < ludmilmm at gmail.com
>     <mailto:ludmilmm at gmail.com>
>     > <mailto:ludmilmm at gmail.com <mailto:ludmilmm at gmail.com>>> wrote:
>     >
>     >     Hi to everyone!
>     >
>     >     My MythTV used to work flawlessly with a stereo analog sound
>     (2ch). I
>     >     decided to switch to SPDIF and now when I try to watch TV,
>     DVDs or
>     >     listen to music (using the Internal player) I don't get any
>     sound.
>     >     However, I can watch videos (using MPlayer) without any
>     problem.
>     >
>     >    
>     ===================================================================================
>     >
>     >     I tried fixing the problem, using the following articles:
>     >
>     >     - Configuring Digital Sound with AC3 and SPDIF
>     >    
>     <http://www.mythtv.org/wiki/index.php/Configuring_Digital_Sound_with_AC3_and_SPDIF
>     >     <
>     http://www.mythtv.org/wiki/index.php/Configuring_Digital_Sound_with_AC3_and_SPDIF>>
>     >
>     >     -  I get no sound from MythTV when watching TV but MythMusic and
>     >     command-line test all work fine. What is the problem?
>     >
>     >     <
>     >    
>     http://www.mythtv.org/wiki/index.php/Configuring_Digital_Sound#I_get_no_sound_from_MythTV_when_watching_TV_but_MythMusic_and_command
>     <http://www.mythtv.org/wiki/index.php/Configuring_Digital_Sound#I_get_no_sound_from_MythTV_when_watching_TV_but_MythMusic_and_command>
>     >
>     >     -line_test_all_work_fine.__What_is_the_problem.3F>
>     >
>     >     -  But I want to have all my sound go to the S/PDIF
>     connector, how
>     >     do I
>     >     do that?
>     >
>     >     <
>     http://www.mythtv.org/wiki/index.php/Configuring_Digital_Sound#But_I_want_to_have_all_my_sound_go_to_the_S.2FPDIF_connector.2C_how_do_I
>     <http://www.mythtv.org/wiki/index.php/Configuring_Digital_Sound#But_I_want_to_have_all_my_sound_go_to_the_S.2FPDIF_connector.2C_how_do_I>
>     >    
>     <http://www.mythtv.org/wiki/index.php/Configuring_Digital_Sound#But_I_want_to_have_all_my_sound_go_to_the_S.2FPDIF_connector.2C_how_do_I
>     <http://www.mythtv.org/wiki/index.php/Configuring_Digital_Sound#But_I_want_to_have_all_my_sound_go_to_the_S.2FPDIF_connector.2C_how_do_I>>
>     >
>     >     _do_that.3F>
>     >
>     >    
>     =======================================================================================
>     >
>     >     When I run: #> aplay -L, I get:
>     >
>     >     {
>     >     cards 'cards.pcm'
>     >     front 'cards.pcm.front '
>     >     rear 'cards.pcm.rear'
>     >     center_lfe 'cards.pcm.center_lfe'
>     >     side 'cards.pcm.side'
>     >     surround40 'cards.pcm.surround40'
>     >     surround41 'cards.pcm.surround41'
>     >     surround50 ' cards.pcm.surround50'
>     >     surround51 'cards.pcm.surround51'
>     >     surround71 'cards.pcm.surround71'
>     >     iec958 'cards.pcm.iec958'
>     >     spdif 'cards.pcm.iec958'
>     >     modem 'cards.pcm.modem'
>     >     phoneline 'cards.pcm.phoneline '
>     >     dmix 'cards.pcm.dmix'
>     >     default    {
>     >         type hw
>     >         card 0
>     >         device 2
>     >     }
>     >
>     >     My /home/mythtv/.asoundrc file:
>     >
>     >     pcm.!default {
>     >     type hw
>     >     card 0
>     >     device 2
>     >     }
>     >
>     >     My /etc/asound.conf file:
>     >
>     >     pcm.!default {
>     >     type plug
>     >     slave {
>     >     pcm "spdif"
>     >     rate 48000
>     >     format S16_LE
>     >     }
>     >     }
>     >
>     >     I added "options snd-pcm-oss dsp_map=2" at the end of my
>     >     /etc/modprobe.conf file.
>     >
>     >     In my frontend (Utilities/Setup - Setup - General) I have:
>     >
>     >     Audio Output Device: /dev/adsp
>     >     Passthrough output Device: ALSA:default
>     >     Mixer Device: default
>     >     Mixer Controls: PCM
>     >
>     >     I also tried checkihg and unchecking the boxes next to:
>     >     Enable AC3 to SPDIF passthrough
>     >     Enable DTS to SPDIF passthrough
>     >
>     >    
>     ======================================================================================
>
>     >
>     >
>     >     So far, I haven't been able to get the sound to work with
>     watching TV,
>     >     DVD or listening to music in MythTV. I tried getting a help
>     from a
>     >     friend who knows a lot more than me about Linux and MythTV
>     (I am a
>     >     newby), but he was not able to help me, either.
>     >
>     >     I am running MythTV ver. 0.2 on Suse 10. My sound card is:
>     ALi M5455
>     >     with spdif-out (6ch).
>     >
>     >     I would really appreciate any help (hints, articles, ideas,
>     etc.)
>     >
>     >     Please, let me know if you need any more info about my
>     >     system/configuration.
>     >
>     >     Thank you!
>     >
>     >     Ludmil
>     >
>     >
>     >
>     >     _______________________________________________
>     >     mythtv-users mailing list
>     >     mythtv-users at mythtv.org <mailto:mythtv-users at mythtv.org>
>     <mailto:mythtv-users at mythtv.org <mailto:mythtv-users at mythtv.org>>
>     >     http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>     >
>     >
>     >
>     > I found all the asound config to be unnecessary.  What ended up
>     > working for me was, make sure ac3 and dts passthrough are both
>     > enabled.  And then change both the audio and passthrough output
>     > devices to be ALSA:iec958.  That's all I needed, hopefully it will
>     > work for you as well.
>     >
>     >
>     >
>     >------------------------------------------------------------------------
>
>     >
>     >_______________________________________________
>     >mythtv-users mailing list
>     >mythtv-users at mythtv.org <mailto:mythtv-users at mythtv.org>
>     > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>     >
>     >
>     Hi Eric!
>     Thank you for your advice! It did work for playing TV and DVDs. I
>     still
>     can't play music through MythTV (and I used to play it with 2ch
>     analog
>     audio cable). Did you have any issues with playing music?
>     Thanks!
>     Ludmil
>     _______________________________________________
>     mythtv-users mailing list
>     mythtv-users at mythtv.org <mailto:mythtv-users at mythtv.org>
>     http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
>
>------------------------------------------------------------------------
>
>_______________________________________________
>mythtv-users mailing list
>mythtv-users at mythtv.org
>http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>  
>
I already set my Myth Music with "ALSA:iec958" but still it is not 
working. I hope to figure it out soon. Thanks!
Ludmil


More information about the mythtv-users mailing list