[mythtv-users] People who have a PVR-150, recording SDTV, playback on a TV and use Nvidia TV card (s-video)
Steven Ellis
steven at openmedia.co.nz
Tue Jun 12 21:03:05 UTC 2007
Rage321 wrote:
> Damn, sorry...I meant MX4000:
>
> 04:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4
> MX 4000 AGP 8x] (rev c1) (prog-if 00 [VGA])
> Subsystem: Jaton Corp Unknown device 0000
> Flags: bus master, 66MHz, medium devsel, latency 248, IRQ 16
> Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
> Memory at f0000000 (32-bit, prefetchable) [size=128M]
> Expansion ROM at fe000000 [disabled] [size=128K]
> Capabilities: [60] Power Management version 2
>
> ------------------------------------------------------------------------
> *From:* mythtv-users-bounces at mythtv.org
> [mailto:mythtv-users-bounces at mythtv.org] *On Behalf Of *Rage321
> *Sent:* Thursday, June 07, 2007 11:50 PM
> *To:* 'Discussion about mythtv'
> *Subject:* Re: [mythtv-users] People who have a PVR-150, recording
> SDTV, playback on a TV and use Nvidia TV card (s-video)
>
> Makes sense. Thanks for the info.
>
> Perhaps my xorg.conf if narfed when it comes to tne FX4000 I'm using?
>
> Here's the relavent info. Does it look optimal?
>
> ########################################
> ## TV
> ########################################
> Section "Monitor"
> Identifier "Monitor0"
> VendorName "Sony"
> ModelName "TV-0"
> DisplaySize 720 480
> HorizSync 30.0 - 50.0
> VertRefresh 60.0 - 60.0
> EndSection
>
> ########################################
> ## Graphic Card (Driver: nvidia)
> ########################################
> Section "Device"
> Identifier "Videocard0"
> Driver "nvidia"
> BoardName "GeForce 4 MX 4000"
> Option "TripleBuffer" "true"
> BusID "PCI:4:0:0"
> EndSection
>
> #######################################################
> ## Video Out (Driver: nvidia)
> #######################################################
> Section "Screen"
> Identifier "Screen0"
> Device "VideoCard0"
> Monitor "Monitor0"
> DefaultDepth 24
>
> ###############################################
> ## tv-out
> ###############################################
> Option "NvAGP" "3"
> Option "ConnectedMonitor" "TV"
> Option "TVStandard" "NTSC-M"
> Option "TVOutFormat" "SVIDEO"
> Option "NoLogo" "Yes"
>
> SubSection "Display"
> Depth 24
> Modes "720x480"
> ViewPort 0 0
> EndSubSection
> EndSection
> ------------------------------------------------------------------------
> **
*You are recording as PAL (720x576) but playing back as NTSC (720x480).
You need to try the following
1. Enable a deinterlacer
2. Make sure your TV output is the correct resolution.
3. Make sure the display size forces a 4:3 output
*
--
Steven Ellis - Technical Director
OpenMedia Limited
email - steven at openmedia.co.nz
sales - sales at openmedia.co.nz
support - support at openmedia.co.nz
website - http://www.openmedia.co.nz
More information about the mythtv-users
mailing list