[mythtv-users] feedback for feature request: ability to define input connections as inactive
martin at knespel.at
Fri Mar 9 08:34:42 UTC 2007
Sounds reasonable. Temporary failure of input signal shouldn't make the
system unusable. That's even more important for test purposes.
Joe Harvell wrote:
> I recently filed a bug report (http://svn.mythtv.org/trac/ticket/3093)
> having to do with input connections with no video sources. The bug is
> that the frontend crashes when you try to access the program guide if
> there are no input connections associated to video sources. The
> response I got was that the frontend should not crash, but instead, the
> program guide should show nothing. I argue that as long as you have
> channels defined you should be able to look in the program guide and
> make schedules.
> Another problem associated with input connections is that if you have a
> capture card defined, but none of that specific capture card's input
> connections is associated with a video source, the backend complains
> that init of that card failed. Then later, the backend crashes if you
> look at "Tuner Status" from "System Status" in mythfrontend. I think
> this is a big problem when you have a capture card whose inputs are all
> temporarily unusable (e.g., disconnected). You have to delete the
> capture card and restart the backend if you don't want the scheduler to
> try to use it to make recordings.
> An easy way to address both above problems is to allow input connections
> to be put in an "inactive" state. Inactive in this context means that
> they are not eligible for watching LiveTV or making recordings. This
> inactive state is what you would put the input connections in when
> nothing is connected to them. This can be implemented by adding a
> boolean column to table cardinput with a default value of TRUE. It
> should not be allowed to assign active=TRUE and have no video source.
> Currently, you can't even define an input connection without assigning a
> video source to it. Table cardinput does not get populated at all if
> you don't assign a video source. Similarly, rows are deleted from
> cardinput if you delete the video source from them. This means the
> system throws away all the configuration data associated with the input
> connection if you want to temporarily delete the association to the
> video source. This would no longer be necessary if the active/inactive
> flag were there to tell you whether to use the input connection or not.
> The reason the program guide doesn't show anything if you have no card
> inputs with video sources is because the program guide needs to know
> which channels have video sources. But it shouldn't matter whether they
> are currently usable (e.g. physically connected) to be able to look at
> the listings. If we no longer make input connections existence
> dependent on their associated video sources, the system has all the data
> it needs to be able to build the program guide and make schedules.
> It seems like most of the code that would need to change would be
> limited to code specifically involved in selecting input connections for
> Live TV and making recordings.
> I would be willing to implement and test this.
> Joe Harvell
> mythtv-users mailing list
> mythtv-users at mythtv.org
More information about the mythtv-users