[mythtv-users] FC6, pvr-250 and IVTV - cannot capture

Chris Hembrow chris.hembrow at pixelseventy2.net
Sat Mar 10 20:36:44 UTC 2007



On Sat, 10 Mar 2007 12:15:51 -0800, Brad Fuller <bradallenfuller at yahoo.com> wrote:
> 
> 
> Chris Hembrow wrote:
>> Hi,
>> 
>> I have just got myself a new sempron 64 3000 and motherboard, and
>> started to rebuild my myth server.  I have migrated from FC4, 32bit to FC6
>> 64bit.  My Hauppauge DVB card is working perfectly, but my Hauppauge
>> pvr-250 will not capture.  To rule things out, I have removed the DVB
>> card.
>> 
>> I installed using Jarod's guide, as always, and installed the ivtv
>> drivers.  "modprobe ivtv" works with no errors in dmesg, and I can use the
>> IR from the pvr-250. But when I try to "cat /dev/video0 >
>> /tmp/test_capture.mpg" it just sits there, with the capture file staying
>> at 0 bytes in size.  I have tried removing the ivtv drivers/firmware from
>> atrpms, and compiling from the ivtv source, using both 0.10.1 and 0.8.2,
>> both with the same results.  I have also tried viewing video through
>> mythtv, but it fails and returns to the menu, with a timeout error in the
>> logs.
>> 
>> Has anyone else had this problem?? I am wondering if it is a
>> kernel/64-bit issue, and if I should try 32-bit FC6 or even FC5.
> 
> device might have moved to video1. Check if it's there or try testing 
> /dev/video1
> 

Hi

when running with the DVB card and pvr-250, it's /dev/video1. When running with just the pvr-250 it's definitely /dev/video0. Either way, I get the same results.

Also, when trying "cat /dev/video0 > mplayer -" nothing happens, and when I ctrl-C it mplayer gives an error about demux_open.

Thanks

C



More information about the mythtv-users mailing list